in.tune II ™ Fully and truly waterproof am-fm receiver / mp3 / cd player User's manual Designed to be used in humid environments.
in.tune II™ table of contents Table of contents features............................................................................................ 3 warning........................................................................................... 4 about compact discs..................................................................... 6 parts list........................................................................................... 8 installation - in.tune II™.....................................
in.
in.tune II™ features Congratulations! Main features Congratulations on the purchase of your very own in.tune II™ CD player! You own one of the industry’s best entertainment system. This system is UV, salt spray and water resistant and is designed to provide hours of troublefree usage. Take a moment to read through this manual and become familiar with the operations and features of your new product. Fully waterproof Speaker outputs 50 Watts x 4 ch.
warning in.tune II™ WARNING Before installing or connecting the unit, please read the following. DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electrical shock. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electrical shock. DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire. DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS.
in.tune II™ warning WARNING When this equipment is provided as an audio/video component for spas, UL 1563 - 5th edition requires that the following instructions (or equivalent) be provided as part of the instruction manual for the spa equipment. PREVENT ELECTROCUTION Do not connect any auxiliary components (for example cable, additional speakers, headphones, additional audio/video components, etc) to the system.
about compact discs in.tune II™ Never attempt the following Inserting a disc CD logo marks New discs Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when power is off. Make sure label side is facing up when you insert the disc. Use only compact discs with the label side showing the CD logo marks above. New discs may sometimes have some roughness around the edges.
in.tune II™ about compact discs Irregular shaped discs Correct handling Disc cleaning Storage Be sure to use round shape discs only for this unit and never use any special shape discs. Using a special shape disc may cause damage to the mechanism. Handle the disc by its edge. To keep the disc clean, do not touch the surface. Never stick paper or tape on the surface of the disc or mark the surface with a pencil or pen.
parts list in.
in.tune II™ installation Mounting surface 2 1/16 " 7 11/16 " Template Step 1 Step 2 Step 3 Using the drilling template supplied with the unit, determine the mounting location and then stick the template on the location. Insert the mounting sleeve into the hole (installation opening). If the installation location is not perfectly even (e.g. wood surface), make a silicone joint between the installation location and the mounting sleeve (to avoid water leakage). Apply silicone all around the unit.
installation in.tune II™ Step 4 Fixing the mounting sleeve: a) Insert mounting bracket. b) Then pull bracket towards you. c) Fix bracket with self tapping screws # 6 x 2" type A. d) Make sure the 6 holes are correctly aligned. e) Brake the installation handle by moving it back and forth. f) Repeat steps a) to e) for the other bracket. 10 Note: The use of an adjustable torque wrench is recommended. Torque setting: 8-12 lbs∙in (0.9-1.36 N∙m). Step 5 Step 6 Connect wires.
in.tune II™ Threaded stud installation Attachment points 30° Mounting strap Left view Step 7 Installation angle Step 8 Re-inforce the back side of the CD Player attaching the threaded stud to the metal mounting strap. Attach the other end of the strap to a solid part of the mounting area (as illustrated above). Please note that if necessary, the strap can be bent to the desired angle (to fit the mounting area).
installation in.tune II™ Step 9 Step 10 Step 11 Step 12 Place the cap plugs for the in.tune II™ with the concavity toward the recess of each of the 4 fixing screws. When properly installed, the caps set even with the installation surface. Peel off the protective paper from the back of the overlay. Make sure the overlay is well aligned and rests perfectly in the recess of the in.tune II™. When properly installed, the caps set even with the installation surface. Clean the surface of the in.
in.tune II™ installation 6 7/32" 158 mm Installation in.k455 with adhesive (optional) TM The keypad should be installed directly on the edge of the spa so that it is easily accessible to the user. Drill 2x 3/8” 2x 9 mm 2 5/16" 59 mm • Using the drilling template supplied with the unit, determine the mounting location and then stick the template on the location. • Drill two 3/8” (9 mm) diameter holes at 6 7/32” (158 mm) from center to center, in the exact position according to the drilling template.
installation in.tune II™ Drilling template (in.
connections in.
connections in.tune II™ Wiring Yellow wire (w/fuse) Connect this wire to a constant +12 volt power source. Red wire Connect this wire to a constant or switched +12 volt power source (a power source turned on and off by the ignition key). Orange wire Connect this wire to the light control switch (dimmer control). If no lighting circuit is available, tape off the end of this wire to prevent shorting out of the unit. 16 Gray wire Connect this wire to the right front speaker (+) positive terminal or wire.
in.tune II™ connections Wiring (Con't.) Note: This unit is designed to connect 4 speakers. If the installation only requires 2 speakers, use the white and gray wire sets to connect the speakers. WARNING Any wires left unconnected must be taped off or capped off to prevent shorting. DO NOT connect speaker ground wires together. DO NOT connect speaker ground wires to the power supply ground. DO NOT connect front and rear speaker wires together.
connections in.tune II™ Auxiliary connection Audio out from VCR / TV in.
in.tune II™ connections Connecting keypad to in.tune II™ The in.k455™ comes with a 20 ft cable terminated with a 8-pin mini din male connector. in.tune II™ TM Wired remote in.k455 (optional) or To connect the keypad, simply insert the 8-pin mini din male connector into the 8-pin mini din receptable as illustrated. Female 8-pin mini din connector Male 8-pin mini din connector TM in.
connections in.tune II™ Connecting in.p3-110™ to in.tune II™ in.p3-110™ (optional) The in.p3-110™ dock station comes with a 10 ft cable terminated with a 9-pin mini din connector. To connect the dock station simply insert the 9-pin mini din male connector into the 9-pin mini din receptable as illustrated. in.tune II™ White Model supported: iPod 4TH & 5TH generation iPod nano (1G - 5G) iPod classic Note: It's not possible to directly control the iPod once connected to the in.p3-110™ docking connector.
in.
icon description in.
in.tune II™ basic operation Power on/off Clock setting Volume up or down Mute Press Power to turn system on or off. When the time is displayed (clock), press and hold Display for 3 seconds. Press Volume up or down to increase or decrease volume. Press Mute to mute the audio output. Press again to return to previous volume level. Time then flashes on the display. Set the hours by using Track up or down. Press Display again. Set the minutes.
basic operation in.tune II™ Tone Source Equalization Use TONE to select either (in order): volume, bass, treble, balance or fader. To change the desired parameter, use Volume up or down. Pressing SRC will allow you to select a source between the following (in order): Bass control: Adjusts the amount of low frequency that you hear. Tuner, CD and Aux, iPod. Successive presses on EQ will allow you to choose from DSP Off, Jazz, Pop, Classic, Rock or Vocal.
in.tune II™ basic operation Reset button Fader Reset button USA/Europe switch Protective cover Successive presses on Fader will allow you to select from one of the following adjustments: If keys on the front panel become locked up, i.e. keys do not function at all, or the display area becomes unreadable,or any other malfunction try this: with a ballpoint pen press the Reset button. You can switch from American (USA) to European radio stations. To do so, power down the unit first.
radio in.tune II™ Selecting radio mode Selecting radio band Tuning up or down Preset stations Press SRC until Radio mode is displayed. Press BAND to select between FM1, FM2, FM3, AM1, AM2. Press Track up to manually adjust frequency up. Press and hold Track up to make a seek up to the next station. Scan mode stops as soon as a strong station is found. Any station may be preset simply by pressing and holding one of the keys (1 to 6). Press Track down to manually adjust frequency down.
in.tune II™ radio Auto scan Display information Press A/PS to scan preset stations. The tuner will scan up and wait for a few seconds, then scan up again. Press Display to switch between the following display information: Once the desired station is found, press A/PS again to stop Scan mode. Frequency - Clock (clock is displayed for 5 seconds only). Pressing and holding A/PS will scan and store stations automatically in each memory (6) of the selected band.
auxiliary mode Auxiliary input Press SRC until the display reads "AUX", which indicates that the auxiliary unit is playing. This mode allows to play sound from external source such as a TV, video, etc. (please refer to "installation & connections" section for the connection of such external devices). 28 in.
in.tune II™ iPod Selecting iPod mode BAND Track up/down Display Press iPod (or SCR key successively) to access iPod mode. Press BAND successively to access the following menus: “Playlist”, “Artist”, “Album”, “Song name”, “Genre”, “Composer”. Press once again to exit. Press to do a track forward or backward. Press the key to change display information as following: Track number/elapsed time Track number/number of tracks - Artist - Song name - Album- Clock.
iPod in.tune II™ Display (continuation) Play/Pause Fast forward Rewind The system can only display the first 8 letters of ID3 tags. If the recorded information is longer than 8 letters, text will scroll to the left once, then the 8 first letters will be displayed. Press this key to pause iPod playback. Press again to return to Play mode. Press and hold key to fast forward song track. Press and hold key to do fast backward song track.
in.tune II™ iPod Intro scan Repeat Random Folder up/down A press will plays the first several seconds of each song track on the current playlist. Press this key to repeat song track. A press will plays all song tracks on the current playlist in random order. Press BAND successively to access the following menus: “Playlist”, “Artist”, “Album”, “Song name”, “Genre”, “Composer”. Then, press one of these keys to scroll through the selected menu content. Press BAND key again to confirm selection.
cd in.tune II™ Eject button Inserting compact disc Ejecting compact disc Selecting CD mode Track up or down Press Open to flip down the front panel and access the CD slot. Insert CD into the CD slot. To eject CD, flip-down front panel must be open, then press Eject button, located on the left. Press SRC until CD mode is displayed. To change music track, simply press Track up or down. The CD will load and play automatically. If the CD does not auto load, do not force it.
in.tune II™ cd Pause mode Intro scan mode Repeat mode Random mode To pause the playing of a disc, press Pause. You can preview each song of the current disc for about 10 seconds. Simply press Scan. To play a song repeatedly, press Repeat. Press Random to play song tracks randomly. Press again to turn off this feature. Press again to turn off this feature. To resume play, press key again. Press again to turn off this feature.
cd in.tune II™ Display information Press Display to switch between the following display information: Track no. / Playtime - Clock (clock is displayed for 5 seconds only). If specific info has not been recorded on an MP3 disc, NO FOLD, NO TRK, NO TLT, NO ALBM, NO ART will be displayed. If you inserted a CD containing MP3 files, a different display info will appear if you press Display: Track no. / Playtime – Folder no. / Track no.
in.tune II™ mp3 Playback order of MP3 files Reading files on a disc MP3 playing order • A directory that does not include an MP3 file is skipped. • Maximum number of files: 999 • Maximum number of folders: 250 • We recommend that you make no more than two folder levels for each disc. • Maximum number of folder levels: 8 • Maximum number of characters for MP3 file name and folder name: 16 • Sampling frequency: 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.
mp3 mode in.tune II™ Example of a disc's folder/file hierarchy Operation of keys Level 1 Level 2 Level 3 Level 4 Level 5 Press ( 1 8 ) to select folder down 7 Press 1 1 6 5 4 3 2 1 7 8 to select folder up 2 3 4 5 6 2 Press 2 8 5 1 8 6 8 6 7 4 7 3 4 36 7 Press 5 3 (Track Down) to select file down Folder File 6 5 4 3 2 1 (Track Up) to select file up 2 3 4 5 6 7 8 Press and hold to return 10 files behind. Press and hold to go 10 files forward.
in.tune II™ basic operations of optional in.k455™ wired remote control On/Off key Source key Up/Down keys Band Key Track down key Track up key * Option accessible through the in.tune II™ only.
in.tune II™ basic operations of optional in.
in.tune II™ Key basic operations of optional in.k455™ wired remote control Description Press Power to turn system on or off. Pressing SRC will allow you to select a source between the following (in order): Tuner, CD, iPod, Aux. Radio mode: Press BAND to select between AM1, AM2, FM1, FM2, FM3. iPod mode: Press BAND successively to access “Playlist”, “Artist”, “Album”, “Song name”, “Genre” or “Composer” and once again to exit. Use Track Up or the Track Down keys to scroll through the selected menu content.
basic operations of optional IR remote control (IRMT-4™) Key/Icon in.tune II™ Description When pressing a key, the red LED blinks to show that the remote control is working properly and sending signals. Use setup for all programming sequences. Refer to the remote control (IRMT-4™) instructions manual for detailed explanation on programming sequences. Press Power to turn system on or off. Press CD to control the in.tune II™ *. Press VOL + or - to increase or decrease volume.
in.tune II™ Key/Icon basic operations of optional IR remote control (IRMT-4™) Description Pressing SRC will allow you to select a source between the following (in order): Tuner, CD, Aux, iPod. MP3 mode: Press to select folder down and press to select folder up. Press and hold one of these keys to skip 10 songs forward or backwards from where you are currently positioned. to scroll through the content of your choice (e.g.
accessories in.tune II™ Optional panel housing (30° mounting bezel) for in.tune II™ Player. Optional IRMT-4™ infrared remote control Optional in.p3-110™ Waterproof protection, docking, connectivity and remote control for iPod. Optional in.k175™ wired remote control Optional antenna cable for in.tune II™ Sold separately. For more information on wired and infrared remotes or other accessories, visit our website at www.aeware.ca 42 Optional in.k455™ wired remote control with display in.power.
in.tune II™ specifications General specifications: Weather band: Power supply voltage: 14,4V (11–14,4V allowable), negative ground Max. current consumption: 15A Back-up current (Ignition OFF): 15mA (Max.) Speaker impedance: 4Ω Operating temperature: 50˚C (122˚F) to –20˚C (68˚F) Weight: 2.18kg (4.
specifications in.tune II™ Applicable Standards: FM tuner: Usable sensitivity (S/N = 30dB): Stereo separation: Signal to noise ratio (S/N): Frequency range: American (USA): Europe: Frequency spacing: American (USA): Europe: 4μV 30dB 55dB UL 1563 Fifth Ed. File: E241878 CSA No. 22.2 - 218.1-M89. 87,5MHz – 107,9MHz 87,5MHz – 108MHz *EN/IEC EN 55013 EN 55020 200kHz 50kHz *Note: see warning section for installation under the spa skirt.
9919-100794-B Rev. 03/11 © 2010 Groupe Gecko Alliance Inc. TM trade-marks of/marques de commerce de Groupe Gecko Alliance Inc. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Gecko Alliance 450 des Canetons, Quebec City (QC) G2E 5W6 Canada, 1.800.78.GECKO 9225 Stellar Court, Corona, CA 92883 USA , 951.667.2000 www.geckoalliance.