Installation Guide

Installation Instruction

Item No: 8113-TL

Note: 120V/150W

WARNING ! – To reduce the risk of fire ,electric shock, or personal injury:

- Ture off / unplug lamp and allow to cool before replacing bulb.

- Do not touch bulb when fisture is turned on

- Do not look directly at lighted bulb

- keep materials that bure easily away from lighted bulb

CLEANING:

Use only soft colth to dust and clean fixture. Never use chemicals or abrasive cleaners as it may

damage finish

★ Keep this instruction for future reference

1. Carefully unpack and take out the parts as picture

shown.

2. Squeeze harp (C) together and insert into saddle

(B) tightly.

3. Attach the shade (D) onto harp (C), then screw the

finial (E).

* HARP MAY HAVE TO BE REMOVED TO

INSTALL BULB

Important Safety Instruction

This portable lamp has a polarized plug (One blade is

wider than the other) as a safety feature to reduce the

risk of the electric shock. This plug will fit in a polarized

outlet only one way. If the plug does not fit in the outlet,

reverse the plug. If it still does not fit, consult a qualified

electrician. Never use an extension cord unless the

plug can be fully inserted. Do not alter the plug.

PAGE 1
Installation Instruction Item No: 8113-TL 1. Carefully unpack and take out the parts as picture shown. 2. Squeeze harp (C) together and insert into saddle (B) tightly. 3. Attach the shade (D) onto harp (C), then screw the finial (E). * HARP MAY HAVE TO BE REMOVED TO INSTALL BULB Important Safety Instruction This portable lamp has a polarized plug (One blade is wider than the other) as a safety feature to reduce the risk of the electric shock. This plug will fit in a polarized outlet only one way.