Use and Care Manual

USER'S MANUAL
MINI-CHANDELIER ITEM#8122-1H&8123-1H&8124-1H
WARNING :
1.Shut off the power to the area where you will be working
2.Use 100Watt maximum type A bulb .
3.Do not use polish or cleaner on your lamp. just wipe with soft cloth.
STEP 1--UNPACK
1. Carefully unpack your new fixture and lay out all the parts on a clear surface.
STEP2--CHANDELIER ASSEMBLY
1. Lock the frame (2) onto the parts (3) with 2 screws (1).
2. Hang the parts (4) onto the parts (3).
3. Hang the parts (5) onto the parts (4).
4. Hang the parts (6) onto the parts (5).
5. Hang the parts (7) onto the parts (6).
6. Hang the parts (8) onto the parts (7).
7. Hang the parts (9) onto the parts (8).
8. Hang the parts (10) onto the parts (9).
9. Hang the parts (11) onto the parts (10).
*IMPORTANT NOTICE
THERE ARE 2 WAYS TO INSTALL THIS CHANDELIER-PORTABLE
WIRE(STEP3) OR FIXED WIRE(STEP4) INSTALLATIONS.FOR
FIXED WIRE INSTALLATION,WE ADVISE CALLING A QUALIFIED
ELECTRICIAN WHEN MAKING THE WIRE CONNECTIONS TO THE
JUNCTION BOX.
STEP3 -PORTABLE WIRE INSTALLATION (1 alternative)
*NOTE:CUT OFF THE FIXTURE COPPER GROUND WIRE.
*CAUTION:
1.INSTALLATION SHOULD NOT BE MADE ON A
RADIANT-HEATING CEILING.
2.THE HOOKS ARE TO ENGAGE THE CHAIN ONLY
AND NOT THE ELECTRIC WIRE.
A.HOOK INSTALLATION(PACKET INCLUDED TWO HOOKS)
For plaster or plaster board ceilings
ST
1.Drill a hole in the ceiling to the same diameter as the closed
flaps of the enclosed TOGGLE BOLT assembly(A).
2.Insert flaps and bolt into the ceiling with the TOGGLE BOLT protruding
through the ceiling lock the assembly by threading on the hook as shown.
For wood or acoustic board ceilings(minimum thick size is 1-1/2
Inch).
1.Select a place on the ceiling where a wood beam exists.
2.Thread the steel screw(B) into hook(C).
3.Screw the assembly into the wood beam.
4.Drape your chain to second hook or let it hang straight.
3.Drape your chain to second hook or let it hang straight.
CEILING
(C)
(B)
(A)
CEILING
1.Thread Nipple (C) into Loop(F)until snug.
2.Thread other end of Nipple(C) with loop attached into
Crossbar(D)until snug.
3.Place lock Washer (B) over end of nipple protruding
through crossbar and thread and thread hex nut (A) onto nipple
until tight.
4.Take this crossbar assembly and mount to ceiling
junction box with Junction box threads(E),Tighten
thread securely with screwdriver.
5.Open the lock link(K1) provided,connect to the fixture
Loop(J) and chain link & close the lock link(K1).
6.Lace the fixture wires through the chain.Slip Loop Collar
(H) over the chain,Then do the same with canopy(G).
7.Open the end Link (K) of the chain and hang the fixture
on the loop(F),& close the link(K).
8.Cut the wire plug off, Feed the fixture wires through the
Loop(F),& and Nipple(C) and pull until taut.
9.Connect fixture wire to the wire from junction box with
wire connectors.See paragraph below.
10.Push canopy(G) up against ceiling and secure with
loop collar(H).
*Your installation is now complete.turn power on.
*WIRE CONNECTION
FOR WIRE CONNECTION,BE SURE TO CONNECT,FIXTURE
SMOOTH WIRE TO THE BLACK HOUSE WIRE,RIBBED WIRE
TO THE WHITE HOUSE WIRE AND FIXTURE GROUND WIRE TO
SUPPLY GROUND WIRE WITH WIRE CONNECTORS OR THE
FIXTURE GROUND WIRE FROM THE FIXTURE TO THE GREEN
GROUND SCREW ON THE MOUNTING BRACKET.
HOUSE WIRES
BLACK
WHITE
GREEN
(Ground)
FIXTURE WIRES
SMOOTH
RIBBED
BARE COPPER
(Ground)
K1
ND
STEP4--FIX WIRE INSTALLATION(2
alternative)
*We adivse contacting a qualified electrician for this step.
*IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one blade is
wider than the other.) As a safety feature,this plug will
fit a polarized outlet only one way.If the plug does not fit
fully in the outlet,reverse the plug.If it will still does not
fit,contact a qualified electrician.Never use with an
extension cord unless the plug can be fully inserted.Do
not attempt to defeat this safety feature.
B.HOOK THE CHANDELIER ASSEMBLY TO THE CHAIN
1.open the lock link(K1) provided,connect to the fixture
Loop(J) and chain link & close the lock link(K1).
2.Once chain & wire are arranged,plug the wire plug into
household electrical outlet.
A
B
F
CHAIN
H
K
E
C
G
D
J
CHAIN
K1