Installation Guide

USER'S MANUAL
MINI-CHANDELIER ITEM 8287-1H
WARNING
1.Shut off the power to the area where you will be working.
2.Use 1-60 Watt maximum type B bulb.
3.Do not use polish or cleaner on your lamp. just wipe with soft cloth.
*IMPORTANT NOTICE
THERE ARE 2 WAYS TO INSTALL THIS CHANDELIER-PORTABLE
WIRESTEP1OR FIXED WIRESTEP2INSTALLATIONS.FOR
FIXED WIRE INSTALLATION,WE ADVISE CALLING A QUALIFIED
ELECTRICIAN WHEN MAKING THE WIRE CONNECTIONS TO THE
JUNCTION BOX.
STEP1--PORTABLE WIRE INSTALLATION(1ST alternative)
*NOTE:CUT OFF THE FIXTURE COPPER GROUND WIRE.
*CAUTION:
1.INSTALLATION SHOULD NOT BE MADE ON ARADIANT-HEATING
CEILING.
2.THE HOOKS ARE TO ENGAGE THE CHAIN ONLY AND NOT THE
ELECTRIC WIRE.
A.HOOK INSTALLATION(PACKET INCLUDED TWO HOOKS)
For plaster or plaster board ceilings
1.Drill a hole in the ceiling to the same diameter as the closed flaps
of the enclosed TOGGLE BOLT assembly(A).
2.Insert flaps and bolt into the cerling with the TOGGLE BOLT
protrudingthrough the ceiling lock the assembly by
threading on the hook as shown.
3.Drape your chain to second hook or let it hang straight.For wood
or acoustic board ceilings(minimum thick size is 1-1/2 Inch).
1.Select a place on the ceiling where a wood beam exists.
2.Thread the steel screw(B) into hook(C).
3.Screw the assembly into the wood beam.
4.Drape your chain to second hook or let it hang straight.
B.HOOK THE CHANDELIER ASSEMBLY TO THE CHAIN
1.open the lock link(K1)provided,connect to the fixture Loop(J) and chain link &
close the lock link(K1).
2.Once chain & wire are arranged,plug the wire plug into household electrical
outlet.
*IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug(one blade is wider than the other.) As a
safety feature,this plug will fit a polarized outlet only one way.If the plug does not
fit fully in the outlet,reverse the plug.If it will still does not fit,contact a qualified
electrician.Never use with an extension cord unless the plug can be fully

Summary of content (2 pages)