User's Manual

Wireless Tree Network
Quick Setup Example
Antennas
A B
1 – root
Omni not used
2 – leaf
Directional
(point to 1)
not used
3 – branch
Directional
(point to 1)
Omni
4 – leaf
Directional
(point to 3)
not used
5 – leaf
Directional
(point to 3)
not used
Minimum Configuration
1 2 3 4 and 5
>load factory >load factory >load factory >load factory
>node type=root-1 >node type=leaf >node type=branch >node type=leaf
>rf1 tr=12 rec=12
(1)
>rf1 rec=12
(1)
>rf1 rec=12
(1)
>rf1 rec=25
>rf2 tr=25 rec=25
(1)
>save >save >save >save
Note 1: Channel 12 and 25 are the defaults for rf1 and rf2 configurations. These commands are not necessary if you plan to use those defaults.
At any node use command “>show tree” to view the complete network and key statistics for each link
1
23
45
Channel 12
Channel 25