User's Manual

pulsAR radio Operator’s Manual
3-16
10. Issue the command:
>set-default-program pmp0x_xx
where 0x_xx file is new version of software being installed.
11. Issue the command:
>reboot
to restart the radio with the new software. Remember to change the PC HyperTerminal settings
back to 9600 baud and disconnect/re-connect the session.
12. Issue the command:
>version
to insure the radio is running the latest version.
3.3.5 Feature upgrades
The PulsAR radio firmware includes optional features and capabilities that may have been activated at
the time of purchase or you may purchase later and activate in the field. This is done via the use of
the “license” command. This command requires a “key” that is specific to a particular radio serial
number and capability. To obtain a feature key, you must supply the specific model number, the
serial number, and the feature desired. Please contact your local distributor for a list of optional
features available for your radio.