User's Manual

pulsAR radio Operator’s Manual
4-15
show-table
table=status or ethernet or econsole or links or tree or radios or ip-stack
format=counts or times
This command displays various tables in different formats as described below:
status table
This contains miscellaneous information including system start and run times, unit temperature,
input DC voltage, and RF link status. The “format” parameter is not applicable for this table.
ethernet-stations table
This table can be displayed in two formats, “counts” (default) and “times”.
>show ethernet
--Discard-- --Forward--
# MAC address IP address Radio from to from to
-- ----------------- -------------- ----- ----- ----- ----- -----
0 ff-ff-ff-ff-ff-ff Local 0 0 0 919
1 00-0d-94-00-3a-9d me 0 0 388 361
2- 01-0d-94-00-00-01 me 0 0 0 0
3 00-a0-cc-66-70-8e 207.154.90.161 4 0 0 197246 99568
4 00-a0-cc-d7-06-76 207.154.90.173 Hub 0 0 99578 197133
5 00-a0-cc-d6-fd-50 6 0 0 122 148
6 00-a0-cc-d7-0b-0d 207.154.90.204 5 0 0 180 0
7 00-a0-cc-d7-0b-14 Hub 0 0 118 0
8 00-0d-94-00-42-69 4 0 0 1 0
>show ethernet times
# MAC address IP address Radio MC Time added Idle VLAN
-- ----------------- -------------- ----- -- ------------ ----- ----
0 ff-ff-ff-ff-ff-ff Local 11-Jan 22:57:57 N/A
1 00-0d-94-00-3a-9d me X 11-Jan 22:57:57 N/A
2- 01-0d-94-00-00-01 me 11-Jan 22:57:57 5490.86 N/A
3 00-a0-cc-66-70-8e 207.154.90.161 4 11-Jan 23:30:48 N/A
4 00-a0-cc-d7-06-76 207.154.90.173 Hub 11-Jan 23:32:32 N/A
5 00-a0-cc-d6-fd-50 6 12-Jan 00:28:22 N/A
6 00-a0-cc-d7-0b-0d 207.154.90.204 5 11-Jan 23:30:56 20.23 N/A
7 00-a0-cc-d7-0b-14 Hub 11-Jan 23:31:14 14.96 N/A
8 00-0d-94-00-42-69 4 12-Jan 00:29:06 21.64 N/A
Both formats list all the ethernet stations attached to either this radio or other radios that have a
direct link to this one. The tables list the MAC (Ethernet) address of the station, and, if known,
the IP address.
The first row in the table tracks broadcast traffic while the second entry is always the address of
the radio itself. The Radio column shows the radio where that station is physically attached. It
may have a number 4 through N which identify one of the children radios as shown in the show
links table. Or it may say: “Local” to indicate stations connected to the local Ethernet, “me” to
identify this radio, “Hub” for the parent radio, and “Bcast” for addresses that are in an
unknown segment (this radio broadcasts packets to these addresses through all ports).
The “counts” format shows the cumulative number of ethernet packets that have been seen with
that MAC addresses in the source (“from”) or the destination (“to”) fields. The radios operate