User's Manual

pulsAR radio Operator’s Manual
4-22
zone=zone-code or offset
Sets the time zone to be used by the radio to translate the NTP time to local time. It can be
specified by an offset from GMT (-0800 or +0200 for example), or as a “zone-code”. The valid
“zone-codes” and the respective offsets are shown below:
Zone zone code offset
Pacific Standard Time PST -0800
Pacific Daylight Time PDT -0700
Mountain Standard Time MST -0700
Mountain Daylight Time MDT -0600
Central Standard Time CST -0600
Central Daylight Time CDT -0500
Eastern Standard Time EST -0500
Eastern Daylight Time EDT -0400
Greenwich Mean Time GMT 0000
help [command-name]
If no command is specified, displays the complete list of commands. If a command is specified
it displays the valid parameter and corresponding values for that specific command.
Examples:
>help monitor-link
history
Displays the previous commands entered.
license
key=< ASCII string>
The “license” command is used to turn ON or OFF a set of optional features or capabilities. The
key is a 35-character string combination of ASCII letters, numbers, and hyphens. The key must
be input with the syntax as shown in the example below, including hyphens, for the radio to
accept it. The characters can be input as upper or lower case.
After entering the key you must reboot the radio for the feature, enabled by the key, to take
effect.
Each key is unique for a particular radio serial number and capability, i.e. a key generated to
turn ON a capability on one serial number will not work on another radio.
Example:
>license key=02EL1-ZGZ42-G0000-00C54-81WAJ-C9BEK