User's Manual

pulsAR radio Operator’s Manual
4-23
logout
Closes the current Econsole session.
reboot
Resets the radio causing the software to perform a complete start up sequence. This is
equivalent to power cycling the radio off and on.
time
time=hh:mm:ss
date=day-month-year
zone=zone-code or offset
This command is identical to the “date” command explained above except for the order of the
parameters. It allows the time and date to be entered as:
> time 10:32:06 16-may-2000
version
Displays the radio model and software version.