YEStablet 7375 Wireless Digital Tablet User Guide Affirmative Computer Products 202 South River Drive, Tempe AZ 85281 Phone (480) 946-1444 Fax (480) 946-9250 Web Site: www.affirmative.
YEStablet 7375 User Guide TABLE OF CONTENTS CERTIFICATIONS AND LIMITED WARRANTY ..............................................................................V Compliance Certifications.........................................................................................................................................v Regulatory Notices ....................................................................................................................................................
YEStablet 7375 User Guide Shared Network Storage......................................................................................................................................19 ActiveSync ..........................................................................................................................................................20 Software Installation.........................................................................................................................................
YEStablet 7375 User Guide Printer Port.......................................................................................................................................................47 LAN Printer..................................................................................................................................................47 Hex Passthrough (HPT) (TN5250e Only) ...........................................................................................................
YEStablet 7375 User Guide © 2003 Affirmative Computer Products. All Rights Reserved Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, mechanical or electronic, for any purpose, without the expressed written consent of Affirmative Computer Products.
YEStablet 7375 User Guide CERTIFICATIONS AND LIMITED WARRANTY Compliance Certifications The Affirmative Computer Products 7375 tablet computing device and any Affirmative Computer Products branded peripherals are subjected to testing and quality controls to ensure that the devices will perform as set forth in the published specifications. All Affirmative Computer Products 7375 tablets have been tested and designed to comply with the identified information technology standards.
YEStablet 7375 User Guide Affirmative Computer Products may, at its option, use new, reconditioned or re-manufactured replacement parts. All replacement products and parts either will assume the remaining warranty of the original product or be covered under warranty for 90 days, whichever period is longer. To obtain service under this Agreement, owner should obtain a Return Material Authorization number (RMA#) from the Technical Support Department.
YEStablet 7375 User Guide TERMS CONTAINED IN THIS STATEMENT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
YEStablet 7375 User Guide CAUTION: FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY Please review the following material carefully. Failure to follow the instructions or failure to heed the warnings contained herein could lead to serious injury. Special Battery Cautions The following are special precautions you should take when using and handling batteries.
YEStablet 7375 User Guide CARING FOR THE 7375 It is important to properly care for your 7375 tablet. Follow these guidelines to ensure your tablet is preserved and protected. • Avoid scratching the screen by always using the supplied stylus or a plastic-tipped pen intended for use with touch sensitive screens. • Do not expose 7375 to rain, liquids, or moisture for an extended period of time. • Do not expose 7375 to temperature extremes.
YEStablet 7375 User Guide THIS PAGE INTENTIONALLY LEFT BLANK x
YEStablet 7375 User Guide GETTING STARTED WITH THE 7375 TABLET Thank you for purchasing the Affirmative Computer Products YEStablet Model 7375. Before you use this device, please read this manual for setup procedures, safety precautions, and other important information. Please review the Contents even if you are an experienced user. If you have any problems, contact Customer support at support@affirmative.net. Featuring a robust magnesium alloy enclosure, the sub-2-lb 7375 with 8.
YEStablet 7375 User Guide THIS PAGE INTENTIONALLY LEFT BLANK 2
YEStablet 7375 User Guide--Requirements TECHNICAL SPECIFICATIONS AND PORTS OF THE 7375 TABLET The 7375 runs on a high-performance, 400MHz Intel PXA255 XScale processor. It is available with 32 MB of Flash ROM memory, 128 MB of SDRAM, and operates on Windows CE .net. It features an 8.4" SVGA (800x600) “high brightness”, touch-enabled display, and, including an optional external battery, weighs in at just over 2 pounds.
YEStablet 7375 User Guide Other Input Devices In addition to using the touch screen and virtual keyboard, the 7375 is also compatible with most USB mouse, keyboard, and barcode scanning devices. Please refer to the list of recommended accessories below to see some of the devices that will best operate with the 7375.
YEStablet 7375 User Guide--Requirements Front-View Layout PC Card Slot Record LED CF Card Slot Microphone 9 10 Headphone Jack Battery LED Network LED 3 11 1 2 4 5 USB Port (Host) 6 7 8 Cradle Interface DC-IN Jack (to-AC-DC) Button Function (Default) Button 1 Description Volume Down 2 3 4 5 6 Volume Up Brightness Up Brightness Down Soft keyboard Cradle USB (ActiveSync) interface Enable 7 8 9 Remote Desktop Connection Desktop Suspend or Power/Reset 10 11 “Record” (Right-Edge) Button Und
YEStablet 7375 User Guide THIS PAGE INTENTIONALLY LEFT BLANK 6
YEStablet 7375 User Guide--Requirements REQUIREMENTS The 7375 features a CompactFlash (CF) slot and a PCMCIA slot. It is anticipated that the PCMCIA interface will be mostly used to provide the wireless LAN connectivity using either an 802.11b wireless LAN adapter or a Sierra wireless cellular adapter. The 7375 may also support dialup modem, tethered Ethernet connectivity, and wireless WAN access. The 7375 supports offline applications and deployment. However, you may choose to have (as base stations) 802.
YEStablet 7375 User Guide Wireless network adapter > Wireless Information tab > Advanced button > Wireless Networks tab. Wireless network adapter > IP Information tab > Details button.
YEStablet 7375 User Guide--Operation OPERATION Power ON and OFF NOTE: • The battery shipped with your tablet should be low in power – please be prepared to use the AC-DC adapter with the 7375 in setting up the tablet for the first time and to fully charge the internal battery pack. • Depending on the origin of your tablet, the 7375 is generally delivered in a “Power Off” state.
YEStablet 7375 User Guide Accessing the Control Panel. Configuring your tablet 1. Click “Start” on the Windows CE Taskbar, select “Settings”, and then click on “Control Panel”. 2. The Control Panel displays several icons associated with utilities for configuring the 7375. Many of these are self-explanatory. Some major ones are discussed below. a) Display Quality/Properties set up i) Click on “Display” icon. The Display Properties window will appear.
YEStablet 7375 User Guide--Operation d) System Properties Set Up Click on “System”; the System Properties window will appear. i) Click on “General”, the System information will be displayed. Then click on “OK” at the top of the window for confirmation. ii) Click on “Memory”, you can adjust the allocation of unused RAM to run programs or for storage (by moving the arrow to right or left). After changes, click on “OK” at the top of the window for confirmation.
YEStablet 7375 User Guide Operating the 7375 together with Cradle The 7375 is complemented by a desktop Cradle for support; pass-through charging; connection of selected USB peripherals, and communication with a PC. On the cradle, you will find a DC-in jack for the AC-DC adapter and a USB (Type B) port for a USB cable connection to PC or laptop.
YEStablet 7375 User Guide--Operation Other Features of Interest Depending on the software configuration, your 7375 tablet may come bundled with the following software features. • Terminal Clients: ICA and RDP You may use the 7375 to connect to Citrix and Microsoft Terminal Servers. 1. “Start” Æ “Programs” Æ “Terminal Client” Æ “Citrix ICA” OR activate Desktop icon (Citrix ICA) to connect to a Citrix Terminal Server. 2.
YEStablet 7375 User Guide • Word Processing Windows CE .net provides the WordPad (similar to Pocket Word) word processing application. This is included with the 7375. • Voice Recorder A Voice Recorder application and its recording function will be activated if the Record button is pushed. Pushing the button again will stop the recording action. Subsequent pushes toggle between record and stop. The application may only be closed manually.
YEStablet 7375 User Guide--Operation • Programmable Buttons The user is able to program most of the buttons (#1-4, 6(or 7)-8, 10, per Front Layout diagram) to operate per tabulated functions or user scripts. Refer to Start > Settings > Control Panel > Button Settings icon to use this feature. Double-tap on the icon to select a button and associated functions.
YEStablet 7375 User Guide THIS PAGE INTENTIONALLY LEFT BLANK 16
YEStablet 7375 User Guide—Operation Notes OPERATION NOTES Wireless Network Card and Antenna System The 7375 has a PC Card slot along the upper left edge. This slot normally houses a wireless LAN adapter or Sierra wireless cellular adapter. In certain configurations, the slot is left open for the user to insert a supported network adapter. In the standard configuration, the 7375 is delivered with an embedded PC card 802.11b wireless LAN adapter with a custom antenna in a snap-type housing.
YEStablet 7375 User Guide Low Battery Condition A warning message will be generated during a Low Battery situation and the 7375 will shortly thereafter be placed into (Forced) Suspend mode if operation continues without external supply of power. After the 7375 enters the (Forced) Suspend mode due to the Low Battery condition: • The Suspend/Resume button will not be able to reactivate the machine unless an AC-DC adapter or a good external battery is connected when the Suspend button is briefly engaged.
YEStablet 7375 User Guide—Operation Notes There is no drag and drop capability between storage folders in the My Computer root. If you want to move files among internal root folders, or from external storage to an internal folder, or vice versa, use Cut, Copy, and Paste from the Edit menu of My Computer. Web Download File downloads from the Web are done in the familiar Web download manner: 1. You are asked if you want to save or open. 2. Choose Save. 3.
YEStablet 7375 User Guide ActiveSync ActiveSync uses a USB connection between the host PC and the USB Slave port on the cradle of the 7375. It also requires the installation of the Microsoft ActiveSync utility on the host PC. The procedure is: 1. Install ActiveSync 3.5 or higher on host PC. E.g., http://www.microsoft.com/mobile/pocketpc/downloads/activesync37.asp 2. Securely seat the 7375 on the Cradle. 3. Connect the USB cable between the 7375’s Cradle and the host PC. 4.
YEStablet 7375 User Guide—Operation Notes Software Update The software on the 7375 may be subject to occasional updates. NOTE: You will lose all configuration information and user files during Update. There are two means to facilitate this process. (i) Through network adapter or local storage under OS 1. Obtain the new firmware image file from Affirmative Computer Products and place it in an FTP server or in local storage. 2. Go to My Computer>Control Panel>Update; the Update window will appear. 3.
YEStablet 7375 User Guide 5. Move the cursor down to the USB Update line item and Select. An "Update OS image via USB port" message will appear and the 7375 is now ready to begin accepting an OS image from a server through the USB port. The download will commence pending the initiation from the host system. 6. The OS update process will be done automatically after the OS image has been successfully downloaded. • Host (e.g., PC running Windows 2000 or XP) side 1.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation YESterm IP TERMINAL EMULATION YESterm IP terminal emulation provides powerful Telnet TN5250e and TN3270e TCP/IP display and printer solutions developed by Affirmative Computer Products. These emulations provide YEStablet 7375 users with the capability to connect to AS/400, iSeries, 3290, and zSeries host computers via the TCP/IP protocol over Local Area Networks and Wide Area Networks.
YEStablet 7375 User Guide Display Session Characteristics • • • • • • • • • • IBM emulations supported: 5251, 5291, 3180-2, 3196, 3278/9, 3477-FC/FG, 5251, 5291. Includes numerous resident national keyboard templates and Code Pages. Includes enhanced keyboard mapping and customization, using Shift, Caps Lock, Alt, Ctrl, function keys, etc. Euro (€) symbol supported. Includes enhanced copy and paste options. Includes tools for keyboard mapping and attributes editing.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Display Setup Screen #1 • • Host Name/IP Address: If you have a local DNS or WINS server, you can type in the host network name. Otherwise, type in the IP address of the host. Port Number: Use the default of 23 unless directed to do otherwise by your network administrator. Display Setup Screen #2 • • • Connection Name: This is the friendly name that will appear in the YESterm IP Administrator screen. Device Type: Select one from the drop-down list.
YEStablet 7375 User Guide Final Display Setup Screen • • Host Code Page: Choose the applicable country from the drop-down list. Keyboard Type: It is recommended that you choose the default 101 Terminal keyboard type. This concludes the setup parameters covered by the wizard. However, you can configure many more parameters in each Display Session by highlighting the connection name in the YESterm IP Administrator window and activating Edit.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Connection Connection Properties Sheet Five of the seven properties on this property sheet were already configured in the Setup Wizard, although you can change them here if you wish. The other two properties are: • Encryption Level. If you want to use sign-on encryption, choose an appropriate encryption level from the drop-down list. Your host must also be configured for this encryption level. • Automatic Startup (not shown above).
YEStablet 7375 User Guide Code Page YESterm IP supports numerous language Code Pages. The Code Page selected here from the drop-down list should be the same one configured on the host for this specific device. Ignore the Code Page Edit button, since Code Page editing is not supported in the 7375. Keyboard Language YESterm IP supports several non-English keyboard languages. If you wish to use one of them, select it from the drop-down list.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Default This button will erase any custom mapping that exists in this map. Everything goes back to defaults. Obviously, you want to be very careful around this key if you have done much custom mapping. Options Keyboard Options Dialog Box This button opens a special dialog box where you can specify the Host Keyboard Language Option, and enable the Multinational character set. Keyboard ID is not used in the 7375.
YEStablet 7375 User Guide • • • Error Message Beep. If this option is enabled, you can hear a "Beep" when an input error is made. System Message Beep. If this option is enabled, you can hear a "Beep" when a message is received from the Host. Lock NumLock. This option has no effect since there is no NumPad in the virtual keyboard. Attributes This properties sheet allows extensive editing of your screen appearance.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Display Emulation Screen with Advanced View and Hot Spots • Standard (Not Recommended). This selection provides the standard green screen “text” appearance for your session screens, duplicating terminal screens. Hot Spots are invisible unless the mouse cursor is placed over one of them, and then only that one Hot Spot is visible.
YEStablet 7375 User Guide Attribute Settings (Standard View Only) Set the appearance of the attribute font on the screen. This includes properties such as foreground and background color, blinking, underscore, and the use of column separators. You will see a preview of the “new look” in the Sample field. Be careful with the colors you choose; a wrong choice can cause text or fields to be invisible on the screen because of lack of color contrast. • Edit (Column Separator).
YEStablet 7375 User Guide—YESterm IP Terminal Emulation A Hot Spot is an area of the session window on which you can tap to execute a command or function. Actually, a Hot Spot is the result of a text search by the emulator for the specified Keyword on the screen. The Function Key and Numeric fields (from 1 to 255 followed by a "period" or "space" followed by text) Hot Spots are active by default; tapping on the numeric or alpha area of a Numeric field will send the numeral followed by the 5250 Enter key.
YEStablet 7375 User Guide Emulation Screen with Standard View and Hot Spots NOTE: Standard View is not recommended because, in Standard View, Hot Spots are visible only when the stylus is positioned directly over the Hot Spot. Advanced View connects Hot Spots to full-time visible buttons, making the Hot Spot feature more intuitive and easier to use. To Edit a Hot Spot: 1. Select the Function Key you want to modify. 2. Click on Edit. 3.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation 4. From the drop-down list, select the command or the Recorded sequence that you want to associate to the Hot Spot. 5. Specify the text search start columns in c.80 and c.132. 6. Click on Accept. 7. Click on Apply. Key Pad A Key Pad is a small window with several customizable push buttons, each having an assigned function.
YEStablet 7375 User Guide Key Pad Properties Sheet To Edit a Key Pad button: 1. Select the Function Key you want to modify from the Button Label list. 2. Click on Edit. 3. If you want to send a Text String to the host every time you press the Function key, type it into the Text String field. 4. Select the Action from the Drop-Down list 5. Select the command or the Recorded sequence from the Drop-Down list that you want to associate to the Hot Spot key. 6. Click on Accept. Click on Apply.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Sign On (TN5250e Only) The Sign On feature of the emulator uses the "Enhanced Display Auto-Signon and Password Encryption" feature of the AS/400 to allow a secure connection to the AS/400 without using SSL. Sign On Properties Sheet (TN5250e Only) For this feature to work to your benefit, the "Remote Signon" parameter of the AS/400 configuration should be enabled. To verify if this parameter is enabled, use the WRKSYSVAL command.
YEStablet 7375 User Guide Advanced The Advanced property sheet allows enabling/disabling of several useful features. Advanced Properties Sheet Appearance • • Show Menu and Toolbar. If you want to eliminate the “Windows” look, uncheck this box. In addition to changing the appearance, this will also prevent the user from using Hot Spots or Key Pad, and from viewing the keyboard mapping. Status Bar type. o Classic 5250. Provides the classic “green screen” look in the status bar. o Graphic.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Host Device Connection When using named devices, careless name assignment or unusual session activation circumstances, such as a power failure/reconnect, can cause two sessions to request the same name. In such a case, the host will not open the second session. Checking the Allow request of…. box will cause the emulator to request a virtual assignment for the second session if it is rejected because of name conflict.
YEStablet 7375 User Guide Printer Session Setup You can have multiple local printers, either physically attached via USB or virtually attached over the TCP/IP network, but you must create a printer session for each one. Setup and configuration are initiated from the YESterm IP Administrator window. Click on Add. You are faced with a choice of four emulation types. After choosing TN3270e Printer or TN5250e Printer, a wizard will guide you through setup.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation 2. Printer Screen #2 • • • Connection Name: This is the friendly name that will appear in the Terminal Connection Manager screen. Device Type: Only 3812 (TN5250e) or 3287 (TN3270e is available for TCP/IP devices. Device Name: If you are using named sessions, enter the session name here. 3. Final Printer Setup Screen • • Host Code Page: Choose the applicable country from the drop-down list.
YEStablet 7375 User Guide Printer Session Configuration Open YESterm IP Administrator, highlight a printer session, and click on Edit. For TN5250e sessions, you will see a Printer Sessions Properties sheet with six properties tabs. For TN3270e sessions, you will see a Printer Sessions Properties sheet with four properties tabs. The opening view is of the Connections tab and properties sheet.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Connection (TN3270e) Connection Properties Sheet for TN3270e Six of the nine parameters on this property sheet were already configured in the Setup Wizard, although you can change them here if you wish. The additional parameters are: • Use this session to support…. If this session is used for Print Screen Extended Local Printing, check this box. • Associate device. Usually a printer session is associated with a specific printer device name.
YEStablet 7375 User Guide Input (TN5250e) The Input tab allows you to define specific parameters that affect the appearance of the printed page. Note: If you are using Host Print Transform (see Advanced), the Input settings do not apply. Input Properties Sheet for TN5250e Language YESterm IP supports a number of different Code Pages. The Code Page selected here should be the same as that configured on the AS/400 for the specific device.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Input (TN3270e) Input Properties Sheet for TN3270e Language YESterm/IP supports a number of different Code Pages. The Code Page selected here from the drop-down list should be the same as that configured on the mainframe for the specific device. Ignore the Code Page Edit button, since Code Page editing is not supported in the 7375.
YEStablet 7375 User Guide Output The Output properties define the communication with the printer. Output Properties Sheet Time Out This parameter defines a timer (in seconds) that starts to count down every time, during a printing job, that the host system stops sending data. If no more data are received within the timeout value selected, the Printer Session will assume that the print job is finished, and a Form Feed command is sent to the printer.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Euro Mode Dialog Box • Driver Configuration. If you wish, you can modify parameters of a listed driver. For more information on how to customize or create a new Passthrough Printer Driver, refer to: How To…..|Modify the Passthrough Driver. . Printer Port Ignore the Parallel Port and COM1/2 radio buttons, even though they are not grayed out. Only LAN or USB printers can be used with the YEStablet 7375, since there are no LPT or COM ports.
YEStablet 7375 User Guide • • • LPR printer. If there is an LPD printer on your network, you can make this selection and enter the appropriate parameters. RAW printer. If you have a network printer that can take direct print stream input without being LPD-ready, make this selection and enter the appropriate parameters SMB printer. If your network printer is accessed through a print server, make this selection and enter the appropriate parameters.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Advanced (TN5250e Only) The Advanced Tab allows you to set Default parameters and enable the Host Transform feature. Advanced Properties Sheet for TN5250e • • • • Message Queue Name. Default is QSYSOPR. Message Queue Library. Default is *LIBL. Default Font. Default is 011. Host Transform. When Host Print Transform is enabled, the host does the EBCDIC-to-ASCII conversion of the print stream, and the local Passthrough Driver is not used. • Printer.
YEStablet 7375 User Guide Miscellaneous Miscellaneous Properties Sheet • • Security Configuration. Default mode is to hide the Properties entries from the Tool bar and the Menu bar so that the user cannot make configuration changes. Check this box if you wish to provide user access to the configuration parameters. Debug Trace. This is not applicable in the 7370.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Display Session Operation Menu Bar Menu bar commands of the Display Session window consist of commands and functions that are unique for each window (session). Display Session Menu Bar The system administrator may disable any or all of the Menu bar commands. See Display Session Configuration|Advanced|Security Configuration. Open the desired menu by clicking on the menu name File (Alt) Display File Menu • • • • • • Connect (n).
YEStablet 7375 User Guide • 4. Open the Edit menu. 5. Activate Copy. Note: Copy does not duplicate host attributes such as color and intensity. 6. Return the stylus cursor to the green screen and click. The white highlight will disappear. Paste (p). This command pastes the current contents of the Clipboard onto the session window, starting at the current cursor position. If the contents of the clipboard are larger than the space available in the presentation space (screen), they may be clipped.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation • Delete Macro (d). This command will bring up the Recorded Macro Delete dialog box. Recorded Macro Delete Dialog Box • In this box will be a list of the available macros for this session. Select the one to be deleted and activate OK. This macro will now be deleted from all display emulation sessions. Playback. No, you don’t see an actual Playback command.
YEStablet 7375 User Guide • • • Ruler (r). This toggle command hides or displays the crosshairs Ruler. When the command is checked, the Ruler is displayed. Attributes (a). This command is not applicable in the 7375. Advanced View. This toggle command activates/deactivates the graphics Windows look, with Hot Spots displayed as raised buttons if they have been enabled.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation ? ? Drop-Down Menu • • • Contents (c). This command is not used in the 7375. Keyboard Help…(k). This command displays the keyboard map in use. You can see the mapping, but you cannot edit it from this screen. This display can be used in two ways: 1. If you click on a key to which a command has been mapped, you will see that command highlighted in the List Box. 2.
YEStablet 7375 User Guide Properties. Duplicates the function of the menu File|Properties command. Start Recording. Duplicates the function of the menu Tools|Start Recording command. In fact, if you use the menu version, you will see that this button is also depressed. Pause. Duplicates the function of the menu Tools|Pause command. If you use the menu version, you will see that this button is also depressed. Stop Recording. Duplicates the function of the menu Tools|Stop Recording command. Play.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation I, II, III, IV. These buttons correspond to the emulation sessions shown in order in the YESterm IP Administrator window. Inactive sessions will have corresponding grayed-out buttons, while buttons for active sessions will not be grayed-out. To jump to another active session, just click on the button for that session.
YEStablet 7375 User Guide Printer Session Operation Menu Bar Menu commands of the Printer Session window consist of commands and functions that are unique for each printer window (session). Open the desired menu by clicking on the menu name. You can also view the File menu by pressing and releasing the Alt key. Printer Session Menu Bar File (Alt) Printer File Menu Connect (n). A Printer Session typically comes up in the connected state.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation About… (a). This command displays detailed information on the YESterm IP program such as version, copyrights, and other useful information. Button Bar The Button bar is displayed across the top of the application window to the right of the Menu bar. The Button bar provides quick access to commands you use on a regular basis. The command/button definitions are: Connect. Duplicates the function of the menu File|Connect command. Disconnect.
YEStablet 7375 User Guide How To …. Create a Custom Keyboard Map To do this, select, in Display Session Configuration|General, one of the available Keyboard Layouts (the one that best matches the one you want to create) and click on Edit. Assuming that you chose the 101 terminal keyboard for U.S. English, the following screen will appear. 101 Terminal Keyboard Map Page Select the key, or key plus modifier (Ctrl, Alt, Shift) to which you want to associate a specific action.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation From the Action drop-down list, you can select the action that you want to associate with the selected key from among the following options: No operation. No action will be performed when you press the key. Command. Choose the desired command function from the lower drop-down list. Recorded Sequence. If you have previously recorded one or more key sequences, you will see their names in the lower drop-down list.
YEStablet 7375 User Guide Modify a Printer Passthrough Driver Any Passthrough Driver in the Printer Session Configuration|Output|Printer Driver drop-down list can be customized, and it is also possible to create a new Driver. To edit an existing Passthrough Driver, do the following: 1. Highlight the connection name in the Configure tab of Connection Manager and activate Edit. 2. Select the Driver from the drop-down list and activate Driver Configuration in the Output. You will see a screen with five tabs.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Transcode Table Driver Transcode Properties Sheet This sheet allows you to: Define the Default Code Page. Pick your desired code page from the Code drop-down list. Customize the Escape sequence used to call the Code Page. Select the Code Page from the list, activate Edit, and an Edit Passthrough Sequence dialog box will appear where you can enter the new value.
YEStablet 7375 User Guide Escape Sequences Driver Escape Sequences Properties Sheet This sheet allows you to customize all the Escape commands used to perform specific functions. Select a function, activate Edit, and an Edit Passthrough Sequence dialog box will appear. Make your changes there.
YEStablet 7375 User Guide—YESterm IP Terminal Emulation Euro Driver Euro Properties Sheet This sheet allows you to customize the Escape command used to print the Euro symbol. This special function allows you to print the Euro symbol even on those printers that are not Euro ready. Select the command you wish to customize, then activate Edit, and an Edit Passthrough Sequence dialog box will appear where you can enter the new value.
YEStablet 7375 User Guide Font ID Driver Font ID Properties Sheet This sheet allows you to customize the Escape commands used to call a Printer Font that has been associated with a Host System Font ID. To edit a Font ID, select the item, activate Edit, and an Edit Font ID and Sequence dialog box will appear where you can enter the new value. Edit Font ID and Sequence Dialog Box You can also remove a font or add a new font to the list.
YEStablet 7375 User Guide—Cisco Aironet WLAN Adapter APPENDIX 1. CISCO AIRONET WLAN ADAPTER In general, when the WLAN network adapter is detected, the 802.1x, zero-configuration support offered by Windows CE .NET invokes a set of windows to define and invoke the wireless link. While convenient and functional, this method does not always offer comprehensive monitoring and configuration of the WLAN environment for maximum utility.
YEStablet 7375 User Guide ACU Status Tab Adapter Profile Setup 68
YEStablet 7375 User Guide—Cisco Aironet WLAN Adapter Adapter’s Network Connection Information Disabling the Network Adapter 69
YEStablet 7375 User Guide THIS PAGE INTENTIONALLY LEFT BLANK 70
YEStablet 7375 User Guide—List of Accessories APPENDIX 2. LIST OF 7375 ACCESSORIES Part Number Description 9370 Stylus Proper tool to operate the Tablet's touch display. Available in kits only; 3 pieces per kit. 9371 Wall-Mount Cradle Assembly VESA-compatible, Wall- and Desk-Mountable structure offers Tablet storage, security, and connectivity to power, USB accessories, and PCs. 9373 9374 Internal Battery Pack (Li-Ion, 14W) Replacement or backup spare for internal battery pack.
YEStablet 7375 User Guide Part Number 9384 New New New 72 Description Screen Protectors for 8.4" Display (10 sheets per package) Replaceable custom-fitted screen protectors shield your display screen from fingerprints, scratches and dust, while maintaining comfortable input. SOCKET "CF In-Hand" Bar-Code Scanner CompactFlash card-based scanner offers convenient operation especially in conjunction with programmable buttons on the Tablet.
YEStablet 7375 User Guide—Optional External Battery Pack APPENDIX 3. OPTIONAL EXTERNAL BATTERY PACK The external battery pack (Figure 1) for the 7375 is intended to add at least 130% to the battery capacity of the internal battery pack. It is hot-swappable and attaches to the upper rear of the 7375 in the area around the corresponding electrical contact pins.
7375 Operation Guide THIS PAGE INTENTIONALLY LEFT BLANK 74 375V0503.
YEStablet 7375 User Guide—Optional External Battery Charger Kit APPENDIX 4. OPTIONAL EXTERNAL BATTERY CHARGER KIT The External Battery Charger Kit is available for use with the optional external battery pack of the 7375. The Kit comprises a battery cradle (Figure 1) and a matching AC-DC adapter and power cord. Figure 1: External Battery Charger Kit – Battery Cradle, AC-DC Adapter, and Power Cord.
YEStablet 7375 User Guide 4. Attach the battery pack to the battery cradle (Figure 4). Figure 4: Insertion of 7375 External Battery Pack. 5. 6. 7. 8. The charging (Yellow) LED lights up if the battery pack is being recharged. When charging is complete or if the battery pack is fully charged, the LED will show solid Green. If the charging LED does not light up at all, the battery is bad. The battery warranty is ninety days.
YEStablet 7375 User Guide—CompactFlash Bar Code Scanner APPENDIX 5. COMPACTFLASH BAR CODE SCANNER The “In-Hand™ Scan Card” bar code scanner by Socket Communications is offered as an optional accessory to the 7375 tablet. This 7375 option is customized to fit intuitively into the CompactFlash® slot along the top edge of the tablet. A hard button on the tablet can be programmed (see Button Settings in Control Panel) or may already be pre-programmed to trigger the scanner function.
7375 Operation Guide THIS PAGE INTENTIONALLY LEFT BLANK 78 375V0503.
YEStablet 7375 User Guide—Using the Wall-Mount and Vehicle-Mount Accessories APPENDIX 6. USING THE WALL-MOUNT AND VEHICLE-MOUNT ACCESSORIES The optional wall- and vehicle-mount accessories for the 7375 are designed to complement the bundled desktop cradle in offering support and connectivity for the tablet in a broader range of deployments.
YEStablet 7375 User Guide Assembly Notes: The Mountable Cradle may be bundled with a set of lower extension brackets to offer added elegance and convenience in the deployment of the 7375. Its use is optional. This kit comprises front (A) and rear (B) brackets with matching screws provided. (A) (B) The assembly process is as follows: 1. Connect the applicable cables to the ports on the cradle bottom; 2.
YEStablet 7375 User Guide—Using the Custom Carrying Pouch APPENDIX 7. USING THE CUSTOM CARRYING POUCH The custom carrying pouch for the 7375 is developed to provide fit and functionality with the tablet inserted. The current design features a retainer section with a fold down cover. The elastic-bound retainer features cutouts on a hard cover for operation with the tablet in place. The fold-down cover doubles as a stand – fold the cover over in the opposite direction and secure in place with the tab latch.
YEStablet 7375 User Guide THIS PAGE INTENTIONALLY LEFT BLANK 82
YEStablet 7375 User Guide—Using the Screen Protectors APPENDIX 8. USING THE SCREEN PROTECTORS Custom-fitted screen protectors are offered as an accessory for the 7375. These are designed to preserve user experience while offering the user peace of mind in using the touch display. Application: 1. Peel off backing starting from any of the 4 notched corners and discard. 2. Apply the screen protector to the display surface, oriented as shown below 3.
YEStablet 7375 User Guide THIS PAGE INTENTIONALLY LEFT BLANK 84
YEStablet 7375 User Guide—FAQ & Troubleshooting Guide APPENDIX 9.
YEStablet 7375 User Guide FEATURES What do all the buttons do? What do all the lights mean? How do I perform a ‘right-click’ function? What other hardware/software can I use with the 7375? The Virtual Keyboard won’t show up or go away.
YEStablet 7375 User Guide—FAQ & Troubleshooting Guide Is there anything I should NOT do with the tablet while I am learning to use it? • The touch screen is made of glass, and is therefore fragile. Treat it as you would a piece of glass. Please use the stylus provided with the 7375 or another stylus designed for use with touch-panels. Do not use a sharp object to touch the screen; you may introduce scratches onto the screen. • Do not spill liquid onto the tablet, especially if the tablet is powered on.
YEStablet 7375 User Guide Powering On/Off In general, how do I turn it on? The Suspend button is on the left side of the 7375. Press the Suspend button momentarily, and release. The 7375 display will come on almost immediately. The following exceptions apply: If this is the first time you are powering on the 7375: - you will need to connect up the AC-DC adapter and briefly press the Suspend button.
YEStablet 7375 User Guide—FAQ & Troubleshooting Guide How do I power the 7375 on after the unit enters Suspend mode and turns the screen off? To wake the 7375 from Suspend mode, press briefly on the Suspend button on the left side of the 7375. The screen will turn back on within a couple of seconds, and you can resume using the unit. I changed my mind immediately after recovering from Suspend mode and wish to put the tablet into Suspend again.
YEStablet 7375 User Guide What are the possible tablet states and how do they relate to the battery status? Refer to the following Battery LED and Status Table.
YEStablet 7375 User Guide—FAQ & Troubleshooting Guide the timed entry by the tablet into power saving modes. Go to Control Panel > Power > Schemes and choose timings based on Battery Power or AC Power schemes. Is there an advised practice for charging the tablet battery packs? The battery packs are constructed with Lithium-ion cells. There is no memory effect and you can charge these batteries at your convenience without waiting for them to drain completely and without affecting the capacity of the cells.
YEStablet 7375 User Guide How do I get onto the Internet? You need the following: • (Wireless) connection to network • Network connection to Internet Service Provider (ISP) • 7375 configuration In general, the 7375 has to be configured to communicate to a wireless Access Point on the local network which in turn has to have a (broadband or dialup) modem connected to the Internet as supported by the ISP. The key in the set up is to obtain a valid IP (Internet Protocol) address for the 7375.
YEStablet 7375 User Guide—FAQ & Troubleshooting Guide Peripherals and Accessories Can I use an external storage device with the 7375? 5. The CompactFlash slot on the top of the 7375 supports most standard CompactFlash memory devices. There are many off-the-shelf memory cards that can be bought at a local computer or camera store. Advanced users may want to make sure that the CompactFlash cards are FAT-based. 6. The USB port on the tablet will also support USB-based storage devices.
YEStablet 7375 User Guide (Start > Settings > Control Panel > Buttons) to scroll up, down, left, or right through menu selections, Web Pages, or other items supported by the software operating system. What do all the lights mean? There are three LEDs on the 7375. The symbols above the LEDs reflect the corresponding features of the 7375 tablet. • The record LED (the left-most LED) is accessible by applications at the factory level.
YEStablet 7375 User Guide—FAQ & Troubleshooting Guide most hard button from the set of four in the lower front of the tablet, labeled with a keyboard icon. A keyboard will appear on the screen, and you can select the letters by tapping them. Press the keyboard button again to make the keyboard disappear off the screen. If you like, you can attach a USB pointing device (mouse, track ball, touch pad) to the 7375 and use that for navigation. Is there a way to scroll down without using the stylus? Yes.
YEStablet 7375 User Guide How can I ensure that changes I made to the configuration of the 7375 are persistent over power loss? The Hard Reset and subsequent restart of the tablet by briefly engaging the reset button is often referred to as Cold Reboot of the tablet. During this process, you may lose tablet settings or user data that have not been properly saved in the 7375. To ensure that settings such as profiles, dates, etc.
YEStablet 7375 User Guide—FAQ & Troubleshooting Guide INDEX 7375 care, ix cautions, 1 device registry, 22 getting started, 1 layout, 5 power source, 3 specifications, 3 travel, ix 802.
Software development support, 20 installation, 20 synchronization, 20 update/upgrade, 21 caution, 21 through Cradle USB, 21 through network adapter, 21 Storage external, 19, 79, 85, 93 internal, 19 network, 18, 21, 95 USB, 19, 21, 95 Storage for transport, 91 Stylus, 94 Support Customer Service, 96 Return Material Authorization, vi Suspend mode Forced, 18 Terminal clients emulation, 14 ICA, 13 RDP, 13 USB Host port on device, 3 input ievices, 4 scanners, 77 slave port, 12 Vehicle power outlet, 91 Viewer doc
