User guide

YEStablet 7375 User Guide

Accessing the Control Panel.

Configuring your tablet

1. Click “Start” on the Windows CE Taskbar, select “Settings”, and then click on “Control Panel”.

2. The Control Panel displays several icons associated with utilities for configuring the 7375. Many of these are

self-explanatory. Some major ones are discussed below.

a) Display Quality/Properties set up

i) Click on “Display” icon. The Display Properties window will appear. You can use choose to

configure parameters associated with configuration of the display Background, Appearance and

Backlight.

ii) Click on “Brightness” icon to adjust the brightness of the display.

b) Network Configuration

Double-click on “Network and Dialup Connections” icon. The displayed window will guide the

configuration or provide information largely identical to accessing the Network icon displayed in the

Taskbar when a supported network adapter is inserted and detected into the 7375.

In general, for an “Adapter” selected, click on “Properties”.

i) You have two options: “Obtain an IP address via DHCP” or “Specify an IP address”.

ii) When you select “Obtain an IP address via DHCP”, you are expecting that an IP address can be

automatically assigned to this tablet.

iii) When you select “Specify an IP address”; you have to ask your network administrator for an address

and type it in the space provided (IP Address, Subnet Mask, and Default Gateway). In addition to that

you have to specify additional “WINS” or “DNS” in “Name Servers”, then click on “OK” at the top

of the window for confirmation.

c) Stylus Setup and Calibration

i) Double-click “Stylus”; the Stylus Properties window will appear.

ii) You can test “Double-Tap” function; you have to follow the instructions to double click the two

squares right of the Window. If it is correct, then click on “OK” at the top of the window for

confirmation.

iii) If you want to recalibrate or your tablet is not responding properly to your taps, select “Calibration”,

follow the instruction to recalibrate. When you are done, click on “OK” to continue.