SDS
affresh
™
Disposal cleaner
MSDS Number:23014
Page 2 of 5
Routes of entry include: eye, skin, ingestion and inhalation.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing. If, eye irritation persists: Get medical advice.
Skin Contact: Wash with water for 15 minutes. If irritation occurs get medical attention. Take off contaminated
clothing and wash it before reuse.
Ingestion: Drink large amounts of water. Do not induce vomiting. If patient feels unwell seek medical attention.
Inhalation: Remove to fresh air. If breathing is difficult, get medical attention.
Delayed Effects: None known.
Extinguishing media: Water spray, all-purpose dry chemical, CO
2
Hazardous Components of Combustion: Thermal decomposition may produce carbon monoxide, carbon dioxide,
and oxides of sulfur.
Special Fire Fighting Procedures:
Self-Contained breathing apparatus and proper protective clothing should be worn when fighting chemical fires.
Personal precautions: Depending on extent of release, consider the need for fire fighters/emergency responders
with adequate personal protective equipment for cleaning up.
Do not eat, drink or smoke while cleaning up. Ensure to protect skin and eyes from accidental exposure during
clean-up. Wear protective clothing, safety glasses and gloves. Use a dust mask if dust or fine particles are
present. Ensure there is adequate ventilation. Avoid all sources of ignition, hot surfaces and open flames.
Environmental precautions: Prevent spills from entering storm sewers or drains and contact with soil.
Methods and materials for containment and cleaning up: Eliminate all ignition sources. For large spills, shovel
up and transfer to a closable disposal container (i.e. plastic lined fiber drum) and dispose of at an appropriate
waste disposal facility in accordance with current applicable laws and regulations. For small spills use a broom
and sweep into an appropriate disposal container. All spill areas should be flushed with water and dried to ensure
no residue is left behind.
SECTION 4 – FIRST AID MEASURES
SECTION 5 – FIRE FIGHTING MEASURES
SECTION 6 – ACCIENTAL RELEASE MEASURES