User`s guide

BOLT(C)
16mm
Qty:12
WASHER(O) (_
25mm
Qty:4 SideView
ARCWASHER(E) AXLE
17mm _ Qty:2
Qty:8
ARCWASHERS(E)
BOLTS
BASERAIL
MAINFRAME
A OpenHARDWAREBAG2.
B Attach the REARUPRIGHTSto the BASEFRAMEusing 4 BOLTS(C),4 WASHERS(D), 4 BASERAILBRACKET
CAPSand 2 AXLES.
NOTE:Assemblethe TOPHANDRAILSsothey areparallel to the floor.Donot assemblewiththe TOP
HANDRAILrestingon the floor.
NOTE:Assemblethe REARUPRIGHTSsotheycurvetowardthe MAINFRAMEas illustrated.
C Partially thread the TOPHANDRAILSto the REARUPRIGHTSusing 8 BOLTS(C) and 8ARCWASHERS(E).
BOLT(F) _ NUT(G)
25mm 8mm
Qty:4 Qty:4
INCLINEARM
BOLTS(F)
TOPHANDRAIL...
NUTS(G)
A OpenHARDWAREBAG3.
B Attach eachTOPHANDRAILto the INCLINEARMusing 4 BOLTS(F) and4 NUTS(G).Tomakeassembly
easier,lightlytighten all four boltsto begin,thentighten firmly after all bolts havebeenstarted.
NOTE:TheINCLINEARMextendsfrom the front of the REARMASTCOVER.
NOTE:Tightenall hardwarefrom AssemblyStep2.
18.0 AXT Rev.2.4.indd 8-99/24/081:41:48 PM