User`s guide

iI_ ii_i i
5
_ i i i I
W
il__iii_i_i_i!I_ii_ii_!!_i_
i ii
i / _ii
2.0 AS rev 1.2.indd 24-25
Yourhomegym is designed to be reliable and easyto use.However,if you experbncea problem,please reference
the troubleshootingguide listed below.
PROBLEM:Thecables feel rough and are noisyduring use.
SOLUTION: Verifythe foflowing-
IS THEREANYNOTICEABLEDAMAGETOTHECABLES?
IF YES..
,' Contactcustomer techsupport and replace the cable(s).
IF NO:
, Verifythat all cables are securedinto the pulleys.
o Verifythat the weight stack guide rods are lubricated.
o Verifythat there is noexcessiveslack in the cables.
NOTE:If there is excessiveslack adjust cable tension (seenextpage)
PROBLEM: Weightselector ph7cannot be hTserted.
SOLUTION,: Verifythe foflowing-
ARETHEHOLESALIGNEDTHROUGHTHEWEIGHTPLATEANDBAYONET?
IF YES:
Verifythat the selectorpin isn't bent or damaged.
IF NO:
, Adjust threadedbolt on top plate so that the holesin the bayonetalign with the weightplate.
NOTE:Always maintain at least ½"of weight cable screw threadedinto bayonetfor safety.
the problem;discO,tin' use.
Thefollowing information may be asked of you whenyou call. Pleasehave these items readily available:
• ModelName
• Serial Number
• Date of Purchase(receipt or credit card statement)
In order for CustomerTechSupport to serviceyour homegym they may needto ask detailed questions about the symptoms that are
occurring. Sometroubleshooting questions that may be asked are:
• flow long has this problem beenoccurring?
• Does this problem occur with everyuse? Withevery user?
• If you are hearing a noise, doesit come from the front or the back? Whatkind of noiseis it (thumping, grinding, squeaking,
chirping etc.)?
• flas the machine beenlubricated and maintained per the maintenance schedule?
Answering these and other questions will give the technicians the ability to send proper replacement parts and the service necessary
to get you and your AFGhomegym functioning again!
ii! :
Cleanfinessofyour homegym and its operationenvironment will keep maintenanceproblemsand service calls to a
minimum. For this reason,werecommendthat the following preventivemaintenance schedulebe followed.
AFTEREACHUSE(DALLY)
o Wipeupholstery,hand grips, bars, and frame (if needed)with a mild cleaning solution.
EVERYWEEg
, Lubricateguide rods with a spray or gel silicone lubricant.
o Inspect cable ends and cable insulation for damage.
EVERYMONTH-IMPORTANT!
o Inspectall frame bolts and tighten as needed.
Pleasecontact AFGwith questions about applyinglubricant to yourhomegym.
ADJUSTINGCABLETENSION
Regularlycheck the cable tensionof your homegym. If excessiveslack
exists adjust cable tensionby removing the pulley bolts and moving
oneorboth pulleys to the inner mounting position in the dual floating
pulley bracketand then reinstalling the pulley bolts. Cabletension
mayalso be adjusted using the threaded cable screw onsingle pulley
bracket and weightstack. Twistthreadedscrew to adjust tensionand
then tighten lock nut.
NOTE:Always maintain at least ½"of threaded bolt in bayonet.
INNER
MOUNTING
POSITIONS
TWISTSCREWTO _ CABLESCREW TWISTSCREWTO _;;;_ CABLESCREW
ADJUSTTENSION,_._J_AND NUT ADJUSTTENSION, _ ._J_AND NUT
THENTIGHTEN THENTIGHTEN
LOCKNUT LOCKNUT
"_SINGLE PULLEY
BRACKETTHREAD
BAYONET
0°POSITION
FRONTORBACKACCESS
300POSITION
FRONTORBACKACCESS
1500POSITION
FRONTORBACKACCESS
900POSITION
LEFTORRIGHTACCESS
Thishomegym allowsyou to choosethe angle ofaccess to the weight selectionpin dependingonhowyou install the
upperand lowermounting brackets, weight plates, and weight shrouds.
NOTE:Makesure the upperand lower mounting bracket are in the sameposition.
/
i ii
i ii i
12/28/07 10:16:50 AM