User`s guide

BEFORE
YOU BEGIN
ASSEMBLY
9
INTRODUCTION
IMPORTANT
PRECAUTIONS
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ASSEMBLY S TE P 2
BOLT (B)
15 mm
Qty: 6
SPRING WASHER (C)
8.2 mm
Qty: 6
ARC WASHER (D)
8.2 mm
Qty: 6
HARDWARE BAG 2 CONTENTS :
A Pull LEAD WIRE through RIGHT
CONSOLE MAST. After pulling the
LEAD WIRE
through the mast, the
top of the CONSOLE WIRE should
be located at the top of the mast.
Detach and discard LEAD WIRE.
B Open HARDWARE BAG 2.
C Slide RIGHT CONSOLE MAST over
MAIN FRAME BRACKET.
*Note: Do not pinch CONSOLE
CABLES when placing the mast onto
the main frame.
D Insert 3 BOLTS (B) on the bottom
outside of the mast and secure with
3 SPRING WASHERS (C) and 3 ARC
WASHERS (D).
E Repeat on other side.
BOLTS (B)
RIGHT CONSOLE MAST
SPRING WASHER (C)
ARC WASHER (D)
MAIN FRAME BRACKET
CONSOLE WIRES