User manual

REMOTE INTERFACE
101
<offset>
-5V ~ +5V (50Ω)
*AFG-2005/2105 limited to 5MHz, AFG-2012/2112
limited to 12MHz.
Example
SOURce[1|2]:APPL:NOIS DEF, 5.0, 2.0
Sets the amplitude to 5 volts with an offset of 2
volts.
SOURce[1]:APPLy:USER
Set
Description
Outputs an arbitrary waveform that is specified
from the FUNC:USER command.
Note
Frequency and amplitude values are not used with
this function; however a value (or DEFault) must
be specified. The values are remembered for the
next function used.
Syntax
SOURce[1]:APPLy:USER [<frequency> [,<amplitude>
[,<offset>] ]]
Parameter
<frequency>
0.1Hz~10MHz
<amplitude>
1mV~10V (50Ω)
<offset>
-5V ~ +5V (50Ω)
Example
SOUR1:APPL:USER
Outputs the ARB waveform specified in the
FUNC:USER command.
SOURce[1]:APPLy?
Query
Description
Outputs a string with the current settings.
Note
The returned string can be passed back, when
appended to the Apply Command. This is
intended to be used to return the function
generator to a known state.
I.e., SOURce[1]:APPL:<passed back string>
Query Syntax
SOURce[1]:APPLy?