Use and Care Manual

ManualsBrandsAFI ManualsBedsNorthfield Walnut Solid Wood Frame Queen Murphy Bed with Mattress and Built In Charging Station

READY

Page 1 of 10

ASSEMBLY INSTRUCTIONS

QUEEN

JCB M6 X 25mm (1”) - 10 pcs

Barel Nut - 6 pcs

JCB M6 X 30mm (1 1/4”) - 6 pcs

JCB M6 X 60mm (2 3/8”) - 8 pcs

Wood dowel - 26 pcs

8 X 30mm

Spare - 1 pc

Spare - 2 pcs

Wood screw 1 1/2” - 2 pcs

Wood screw 1” - 17 pcs

Spare - 1 pc

Spare - 2 pcs

Triangle Bracket - 2 pcs

Allen wrench - 1 pc

Spare - 1 pc

PO :

NORTHFIELD MURPHY BED

WITH CHARGING STATION

Before assembling your murphy bed, please read through these

instructions carefully and familiarize yourself with the different parts.

ATTENTION! If you receive a damaged or defective item,

please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726

Adult assembly

Phillips screwdriver

Customer supplied

HARDWARE

NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

Summary of content (10 pages)

PAGE 1
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN ASSEMBLY INSTRUCTIONS READY Before assembling your murphy bed, please read through these instructions carefully and familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726 Phillips screwdriver Customer supplied Adult assembly PO : HARDWARE A D G NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PAGE 2
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN PARTS LIST 01 HARDWARE 02 TOP PANEL 03 LEFT SIDE PANEL 04 RIGHT SIDE PANEL 05 FRONT RAIL 06 SHELF 07 MIDDLE BACK RAIL 02 C-5849X 1 BOX 03 07 09 09 08 BOTTOM BACK RAIL 09 BACK PANEL 10 DOOR PANEL 11 DRAWER FACE 12 DRAWER SIDE 13 DRAWER BACK 14 DRAWER PANEL 15 DRAWER PANEL SUPPORT 16 DRAWER SIDE BLOCK 17 FOLDING MATTRESS C-5845X 1 BOX 10 06 C-5842X 1 BOX 04 16 12 08 13 14 15 1 BOX 05 11 12 01 16 17 STEP 1
PAGE 3
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN STEP 2 Attach left side panels (03) to the shelf (06), front rail (05), middle back rail (07) and bottom back rail (08) as shown below. Use JCB (B)(D) and barrel nut (E).
PAGE 4
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN STEP 4 Attach right side panels (04) to cabinet assembly as shown below. Use JCB (B)(D) and barrel nut (E).Tighten with Allen wrench (H) Be sure it fits fully into its groove at the bottom (in the side panel) before fitting the side panel.
PAGE 5
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN STEP 6 Attach top panel (02) to cabinet assembly as shown below. Use JCB (B). Tighten with Allen wrench (H) 02 Adult assembly B B B 1” JCB M6 X 25mm B B H Allen wrench B B BOTTOM VIEW STEP 7 Open top drawer folding leg until lock of metal support as shown below.
PAGE 6
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN STEP 8 Attach door panel to cabinet assembly as shown below. Use wood screw (F) tighten with Phillips head screwdriver. (customer supplied). Be sure to align with cabinet. F Adult assembly F F Wood Screw 1” F F Phillips screwdriver Customer supplied STEP 9 Lift the door and push the metal support. Push the door closed and latch both sides as shown below.
PAGE 7
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN STEP 10 Attach triangle bracket (I) to the back of cabinet as shown below. Use wood screw (F) tighten with Phillips head screwdriver. (customer supplied). PILOT HOLES I I F F Adult assembly I I Triangle bracket F F Wood Screw 1” Phillips screwdriver Customer supplied STEP 11 Lay the drawer face (11) on smooth, flat surface so the groove is facing upwards.
PAGE 8
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN STEP 12 Guide the drawer panel (14) in carefully so that it won’t jump out of its grooves. Be sure it fits fully into its groove at the bottom (in the drawer face) before fitting the drawer back. Attach drawer panel support (15) to the drawer face as shown below. 14 15 Adult assembly STEP 13 Attach drawer back (13) and drawer side block (16) to bed drawer assembly as shown below. Use JCB (C)(D). Tighten with Allen wrench (H).
PAGE 9
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN STEP 14 Move the murphy bed where you want to place them in the room. Push drawer assembly in as shown below. Be sure to align with cabinet. Adult assembly STEP 15 Unlatch the door and open top drawer folding leg until lock of metal support, folding down as shown.
PAGE 10
NORTHFIELD MURPHY BED WITH CHARGING STATION QUEEN STEP 16 Open and pull footboard frame and open footboard leg as shown below. FOOTBOARD FRAME Adult assembly FOOTBOARD LEG STEP 17 Install folding mattress (17) to the bed. Open top panel as shown below. Adult assembly 17 17 Congratulations! Your Murphy bed is now ready for use. We recommend that you recheck that all screws are tight, and that all parts are secure before use to ensure lasting Safety.