Instructions / Assembly

ManualsBrandsAFI ManualsDaybedsAcadia White Twin Solid Wood Daybed with Twin Trundle

Table Of Contents

Adult assembly

READY

ASSEMBLY INSTRUCTIONS

Before assembling your Daybed, please read through these

instructions carefully. Familiarize yourself with the different parts.

DAYBED

Page 1 of 3

HARDWARE

Allen wrench

NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.

ATTENTION! If you receive a damaged or defective item,

please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726

JCB M6 X 2 1/2”( 65mm ) - 4 pcs

Wood dowel - 4 pcs

Spare - 1 pc

JCB M8 X 5/8”( 15mm ) - 8 pcs

Barrel Nut - 4 pcs

Wood Screw - 24 pcs

Allen wrench M6 - 1 pc

Allen wrench M4 - 1 pc

PO :

CODE ITEM

DB-AM-ACA

DB-FP-ACA

G-11312X

G-11412X

Summary of content (7 pages)

PAGE 1
DAYBED ASSEMBLY INSTRUCTIONS READY Before assembling your Daybed, please read through these instructions carefully. Familiarize yourself with the different parts. ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726 Allen wrench Adult assembly CODE ITEM DB-AM-ACA G-11312X DB-FP-ACA G-11412X PO : HARDWARE NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PAGE 2
PARTS LIST 04 02 06 06 05 05 01 HARDWARE 1 BOX 02 LEFT DAYBED ARM 1 PC 03 RIGHT DAYBED ARM 1 PC 04 BACK PANEL 1 PC 05 FRONT / BACK RAIL 2 PCS 06 SLAT KIT 2 SET G-11412X G-11312X 1 BOX Step 1 03 01 G-11412X 1 BOX Attach the back panel (04) to the left and right daybed arm (02)(03), using wood dowels (A), JCB M6 X 2 1/2”(B) and barrel nut (E). Tighten with the Allen wrench (G).
PAGE 3
Attach the front and back rail (05) to the Daybed arms as shown, using JCB M8 X 5/8” (C). Tighten with the Allen wrench (F). Step 2 C Adult assembly C C C C 05 JCB M8 X 5/8” 05 F C Allen wrench Step 3 Lay the slat kit (06) onto the rail assembly as shown, using wood screw (D).Tighten with the Phillips head screw driver (Customer supplied). D D 06 Adult assembly 06 D Wood screw D Phillips screwdriver Customer supplied Congratulations! Your Daybed is now ready for use.
PAGE 4
TRUNDLE BED TWIN ASSEMBLY INSTRUCTIONS READY Before assembling your Trundle bed, please read through these instructions carefully. Familiarize yourself with the different parts. Adult assembly ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726 Phillips screwdriver Customer supplied CODE ITEM ST-TD-ISL G-35802X PO : HARDWARE NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
PAGE 5
TWIN PARTS LIST 01 HARDWARE 1 BOX 05 LEFT, RIGHT, MID RAIL 3 PCS 02 FRONT PANEL 1 PC 06 SLAT KIT WITH WEBBING 2 SETS 03 FRONT RAIL 1 PC 04 BACK RAIL 1 PC 05 06 04 05 06 05 02 01 03 Step 1 Attach the left, right and mid rails (05) to the front rail (03) using L bracket (C) and JCB M6 X 1 5/8”(A). Attach left, right and mid rails (05) to the back rail (4) using JCB M6 X 1 5/8" (A). Tighten with the Allen wrench (E).
PAGE 6
TWIN Step 2 Attach the front panel (02) to the front rail (03) as shown, using JCB M6 X 5/8” (B). Tighten with the Allen wrench (E). B B Adult assembly B 02 B 03 JCB M6 X 5/8” E B Allen wrench Step 3 Lay the slat kits (06) webbing side down onto the rail assembly as shown. Attach using wood screw (D) and tighten with the Phillips head screw driver.
PAGE 7
TWIN Congratulations! Your Trundle bed is now ready for use. We recommend that you periodically check that all screws are tight and all parts are secure to ensure lasting safety. Step 4 Lastly, Insert Trundle bed to the bed as shown below.