Installation manual

102 Appendix A User Information and Instructions P/N 9040322
Managing Health, DIM, Activity, and Days from Insemination Parameters
Use this message for changing, entering or canceling one or more of the following
parameters:
 Health code
 Days-in-milk (DIM)
 Activity/ Days from insemination
1. On the Terminal 155i, press the Edit/ Message mode button .
The message sub-mode is activated.
2. Do the following for each parameter that you need to modify:
a. Press the health code button .
The health code field blinks with hyphens .
b. If you need to display a different parameter, while holding down the
Function button , press the health code button to toggle among the
Health Code, Days in milk, and Activity/ Days from insemination fields.
A second code is displayed on the Peak flow field, and a third code is
displayed on the Momentary flow field.
c. Do the appropriate of the following:
 To enter or change a code, use the alphanumeric keys to type
the code.
 To cancel an existing code, do not type anything.
3. Press the Enter button .
While the data is being processed, the data updating icon flashes. Following
successful processing, the changed health code is displayed without blinking.
Managing the Infected Half Code
Use this procedure for changing, entering, or canceling the the code for an infected
half udder.
1. On the Terminal 155i, press the Edit/ Message mode button .
The message sub-mode is activated.
2. Do one or more of the following:
▪ To mark the left half as infected, press 1.
▪ To mark the right half as infected, press 3.
▪ To clear infected-half marking, press the Cancel button .
3. Press the Enter button .