Installation manual

May 2009 AfiFree Terminal 155i Installation Manual 27
Chapter 2 Site Preparation
Requirements
This chapter contains the following sections:
 Component Positioning Requirements (below)
 Physical Infrastructure Requirements (page 30)
 Physical Interfaces to Components (page 30)
 Electrical Requirements (page 30)
 Computer Requirements (page 32)
Component Positioning Requirements
This section explains the positioning requirements for the following components:
 AfiFree Body (below)
 Terminal 155i (page 28)
 Connection Box (page 28)
 Wash Controller (page 29)
 Wash Control Valve (page 29)
 Optional external start button (page 29)
AfiFree Body Positioning
Position the AfiFree Body as follows:
 Below the milking platform
 Above the milk line, to allow gravity to control the flow of milk
 Where it can be level
 So that the hose connecting the AfiFree Body to the milk line can have a
downward slope of 1.5
o
in the direction of the flow of milk
 Protected from mechanical damage
 In accordance with the distances specified in Table 4
Table 4: Distance between AfiFree Body Outlet and Milk Line
Distance (mm)
Minimum
Maximum
Vertical
To top edge of milk line—110
To bottom edge of milk line—350
Horizontal (to milk line inlet)
200
300