Installation manual

40 Chapter 3 Mounting and Wiring P/N 9040322
Mounting the Terminal 155i Bracket with Bands to a Pipe
1. Determine the best location for Terminal 155i bracket in accordance with
Terminal 155i Positioning (page 28).
2. Attach the Terminal 155i bracket to a pipe with suitable bands, as shown in
Figure 19.
Figure 19: Terminal 155i bracket attached with bands to a pipe
Bolting the Terminal 155i Bracket to a Cabinet
Figure 20: Terminal 155i bracket bolted to a cabinet
NOTE
The current procedure explains how to affix the bracket to the outside of
the cabinet with nuts and bolts.
Among your additional options are the following:
 You can affix the bracket to a pipe (rather than a cabinet), using the
vertical attachment option rather than the horizontal attachment option.
 You can use 6.2mm self-drilling screws, rather than bolts.