Installation manual

May 2009 AfiFree Terminal 155i Installation Manual 41
1. Determine the best location for Terminal 155i bracket in accordance with
Terminal 155i Positioning (page 28).
2. Mark the two horizontal holes to be drilled in the cabinet, as shown in Figure 20.
3. Drill the holes, using a 6.5 mm. drill bit.
4. Secure the Terminal 155i bracket to the cabinet with M6 bolts, lock washers, and
nuts.
Mounting the Terminal 155i
Figure 21: Orienting Terminal 155i to its bracket
1. With two hands, push the two lower clips on the back of Terminal 155i through
the rectangular holes of the mounting bracket.
2. To make sure that the top clip is above the bracket, while maintaining firm
pressure, slide the Terminal 155i up.
3. While maintaining firm pressure, slide the Terminal 155i down.
The top clip now secures the Terminal 155i to the bracket.
Wiring Terminal 155i
WARNING
 Take appropriate precautions to prevent injury from electric shock.
 Wrap and seal a supplied adhesive-warning label (P/N 9040455)
around Terminal 155i cable.
Terminal 155i is supplied with a cable terminated in a D-connector. Connect this as
follows:
 Installations using AfiFree Connection Boxes—see Wiring Terminal 155i to an
AfiFree Connection Box (below)
 Installations using PICBs—see Connecting Terminal 155i to a Plug-in
Connection Box (below)