Installation manual

May 2009 AfiFree Terminal 155i Installation Manual 45
Connecting the Pulsator to a Plug-in Connection Box
When connecting solenoids to a PICB, use the appropriate procedure of the
following:
 For installations using AfiMilk solenoids—see Connecting an AfiMilk Pulsator to
a Plug-in Connection Box (below)
 For installations using non-AfiMilk solenoids—see Wiring a Non-AfiMilk
Pulsator to a Plug-in Connection Box (page 45)
Connecting an AfiMilk Pulsator to a Plug-in Connection Box
Plug the Pulsator cable into socket 5 of the PICB.
Wiring a Non- AfiMilk Pulsator to a Plug-in Connection Box
Wire a non-AfiMilk pulsator as follows:
1. Cut off the pulsator connection cable’s yellow wire.
2. Wire the blue and brown wires to the pulsator, as described in Table 9 (below).
3. Plug the connector of the pulsator connection cable into socket 5 of the PICB.
Table 9: Wiring a Non-AfiMilk Pulsator
Color of Wire on
Connection Cable
(P/N 4097327)
Function of Wire
Blue
Pulsator
Brown
+VBR
Yellow
None
Mounting and Wiring an External Start Button
Mounting and wiring an external start button has the following parts:
 Mounting an External Start Button (below)
 Wiring an External Start Button (below)
Mounting an External Start Button
1. Determine the best location for the external start button in accordance with
Positioning Optional External Start Buttons (page 29).
2. Mount the external start button in the location determined.
Wiring an External Start Button
Connect an external start button as follows: