Installation manual

58 Chapter 4 System Configuration P/N 9040322
Chapter 4 System Configuration
System configuration has the following steps:
1. Configuring AfiSheep/AfiGoat (below)—only necessary when AfiFree 155i milk
meters are connected to a flock management computer
2. Configuring Milk Meters (page 61)
3. Setting Up the Wash Controller (page 70)
4. Testing AfiFree155i Performance (page 73)
5. Configuring AfiFree 155i Parameters (page 74)
Configuring AfiSheep/AfiGoat
Configuring AfiSheep/AfiGoat has the following steps:
1. Configuring the AfiCom1 card—see the AfiFarm Configuration Manual
(P/N 9040148)
2. Configuring the Parlor—see below
Configuring the Parlor
1. Make sure AfiSheep/AfiGoat and AfiMen are closed.
For instructions on closing AfiMen, see the AfiFarm User Manual.
2. Open Config.
3. In the Config window, select Station/Add/Parlor.
4. Choose from:
The following dialog box appears:
Do this:
Select PC
Select the PC to which the parlor is
connected, and go to step 5.
Parlor Configuration (Figure 32)
Go to step 5.
NOTE
Terminal 155i supports a variety of parlor types. The Terminal 155i
configurations for the various parlor types will be documented in a separate
document.