Installation manual

May 2009 AfiFree Terminal 155i Installation Manual 65
Manual Identification Number Assignment
If there was a malfunction during automatic identification number assignment, or one
or more identification numbers were incorrectly assigned, you can assign
identification numbers manually.
NOTE
The highest possible stall identification number is 64.
1. On the Terminal 155i, simultaneously press and until Id appears on the
display.
The Terminal 155i is now in Settings mode.
Id is short for Stall Identification Number. If the stall has an Identification
Number, the Identification Number appears after Id (for example, Id23). If the
stall has no identification number, Id_ _ appears on the display.
NOTE
When the Terminal 155i is in Settings mode, if you press for four
seconds, the Terminal 155i saves the current settings and exits Settings
mode.
2. Press .
The display flashes.
3. Display the desired number as follows:
 To increase the displayed number by one, press for less than four
seconds.
The highest possible stall identification number is 64. When the display
reads Id64, pressing displays Id01.
 To decrease the displayed number by one, press .
4. When the display shows the desired number, press for four seconds.
The Terminal 155i sets the stall identification number and exits Settings mode.