Installation manual

80 Chapter 4 System Configuration P/N 9040322
Auto Program
Auto Program is a parameter set in AfiSheep/ AfiGoat that determines whether
AfiMen automatically loads parameter values (except for the G parameter) to milk
flow indicators. When Auto Program is enabled AfiMen functions as follows:
1. When communication is established with the milk meters, AfiMen compares the
parameter values in each milk meter with those set in AfiSheep/AfiGoat (except
for the G parameter).
2. If any milk meter has a parameter with a value different from the value in
AfiSheep/AfiGoat, then AfiMen overwrites the value in the milk meters with the
value in AfiSheep/AfiGoat (except for the G parameter).
This option is useful when replacing a Terminal 155i or installing a new one.
To enable Auto Program:
1. Open AfiSheep or AfiGoat.
The AfiSheep or AfiGoat main window appears.
2. In the AfiSheep or AfiGoat main window, select Parameters from the Tools
menu.
The parameters window appears.
3. Click the Milking Station icon in the Station pane.
The AfiFree 155i parameters appear in the right hand pane (Figure 40).
Figure 40: The Auto Program Check Box
4. Select the Auto Program check box (Figure 40).
5. Click OK to accept the changes.
The Password dialog box appears.