Installation manual

82 Chapter 4 System Configuration P/N 9040322
The Parameters window appears.
3. Click under Station.
The AfiFree 155i parameters appear in the right hand pane (see Figure 41).
Figure 41: AfiSheep/AfiGoat Parameters Screen
The initial values assigned to each parameter are the default values.
4. Modify parameter values as follows:
 Integers (e.g. 8)—click the field and type the new value.
 Unit type (e.g. Kg)—click in the Parameter Value box to open the Unit
Type menu, and select a new value.
5. Click OK to accept the changes.
The Password dialog box appears.
6. In the Password dialog box, type afi and click OK to confirm the changes.
Uploading Parameter Values from AfiSheep/AfiGoat to All the Milk Meters
There are two types of parameter value upload from AfiSheep/AfiGoat to the milk
meters:
 Updating all parameter values except the G parameter value (below)
 Updating all parameter values including the G parameter value (below)
To update all parameter values except the G parameter value on all AfiFree 155i milk
meters:
In the Parameters window, make sure the Auto Program check box is selected (Figure
40)