Installation manual

May 2009 AfiFree Terminal 155i Installation Manual 83
When communication is established with the milk meters, AfiMen compares the
parameter values in each milk meter with those set in AfiSheep/AfiGoat (except for
the G parameter). If any milk meter has a parameter with a value different from the
value in AfiSheep/AfiGoat, AfiMen overwrites the value in the milk meter with the
value in AfiSheep/AfiGoat (except for parameter G).
To update all parameter values including the G parameter value on all AfiFree 155i
milk meters:
1. Open AfiMen.
The AfiMen Real Time window appears (Figure 33)
2. In the AfiMen Real Time window, select .
3. Click .
The Password dialog box appears.
4. In the Password dialog box Type afi, and click OK.
The communication icons flash red for a few moments and return to blue when
the parameter values have been updated.
The AfiFree 155i milk meter enters Test mode, and the Terminal 155i displays
the following indications several times (for about 10–60 seconds):
▪ Terminal 155i software version (for example, 2.05)
▪ Parlor configuration (for example, CF01)
▪ Table version (for example, tbCo)
▪ PuPd (Parameter Update)
5. To return to normal operation mode, click .