Installation manual

98 Appendix A User Information and Instructions P/N 9040322
Changing Operating Mode
Table 26 shows how to change the operating mode of the Terminal 155i.
Table 26: Changing Operating Mode
Present Mode
Action
New Mode
Terminal is OFF
Power ON
Cleaning Mode
Cleaning Mode
Cleaning button pushing
Removal Mode
Cleaning Mode
Start/Stop button pushing
Removal Mode
Removal Mode
Start/Stop button pushing
Milking Mode
Removal Mode
Cleaning button pushing
Cleaning Mode
Removal Mode
PC button pushing*
Message Sub-Mode in Removal
Mode*
Milking Mode
Start/Stop button pushing
Removal Mode
Milking Mode
PC button pushing*
Message Sub-Mode in Milking
Mode*
Message Sub-Mode in Removal Mode*
PC button pushing*
Removal Mode
Message Sub-Mode in Removal Mode*
Enter button pushing
Removal Mode
Message Sub-Mode in Milking Mode*
PC button pushing*
Milking Mode
Message Sub-Mode in Milking Mode*
Enter button pushing
Milking Mode
* PC button and Message Sub-Mode are available in configuration with AfiSheep/
AfiGoat only.
Terminal 155i Settings
This section deals with various Terminal 155i settings.
Changing a Stall Number
Specifying a stall number is a procedure required when working under AfiSheep/
AfiGoat. It is also available for standalone configuration.
1. On the Terminal 155i, press the Edit/ Message mode button .
The message sub-mode is activated.
2. Press the Stall number button .
The Stall number field blinks with hyphens .
3. Type the new stall number.
4. Press the Enter button .