User manual

CHAPTER 5 – ADJUSTMENT INSTRUCTIONS

(Numbers refer to Figures 4 and 5)

Adjusting the tiller

angle (1.7)

Adjust the angle of the tiller as follows:

 Release the tiller adjustment lever (1.10), by pushing it

down.

 Release the lever at the desired place.

Adjusting the

handlebar height

Handlebar height can be adjusted about 40mm by a technician.

Seating in the

Breeze S

Before attempting to drive the Breeze S, make sure the plug is

disconnected from the charging socket (1.12).

Note: While the plug is in the charging socket, the Breeze S

cannot be operated.

Use the seat rotation lever (7.5) to rotate the seat sideways, and

raise the armrest (7.3) to give you easy access to the seat.

Use the seat forward/reverse lever (7.4) to adjust the location of

the seat.

Handlebars and hand

protectors

When driving always keep your hands on the handlebars (1.7) and

within the hand protectors (1.6).

Adjusting the shock

absorbers to the

user.

It is possible to adjust the rear shock absorber to the required load

or way of using the Breeze S. If necessary, ask a technician to

adjust the absorbers for your needs.

Figure 4 Figure 5