User manual

``
25
Performance
check
A performance check is highly recommended when you first receive your
Breeze S or after a period of not using the Breeze S, as follows:
1. Turn on the key switch.
2. Verify that the LCD display is ON.
3. Slowly squeeze the drive control lever and verify that the Breeze S
travels at a speed that corresponds to the degree to which you are
squeezing the lever.
4. Release the throttle control lever and verify that the Breeze S stops
smoothly, and that you hear the click of the EMB engaging.
5. Check that all the buttons on the handlebar work correctly.
6. Switch off the key switch.
Your Breeze S is now ready to drive.
Prior to use
Before using the Breeze S, be sure you know your own weight and the
weight of any items you will be carrying on it. The maximum total load is
160 kg (352 lbs) /200 kg (440 lbs). (Depending on the model).
Safety belt
Use a seat belt whenever it is needed or as required by local traffic
regulations.
Securing the
Breeze S in
motor vehicle
for
transportation
To transport the Breeze S in a motor vehicle, it must be secured (see
Figure 8).
Using standard approved tiding straps, secure the 4 tiding ear plates
painted in Yellow (2 at the front and 2 at the rear of the scooter), to the car
secure hooks.
Warning: When transporting the Breeze S, never let anyone sit on it.
Figure 8
Transportation
To reduce the height of the Breeze S while transporting it, the seat can be
removed as explained in Chapter 8 Maintenance, and the handlebar
column can be folded to horizontal position.