Operation Manual

21
Note: The numbers in parentheses refer to the parts illustrated on Figure 1+2+3.
Keys/Cellphone pockets (4.5)
Right & Left
Machine plate with Serial
number (4.6)
Serial Number and Manufacturer’s data are fixed on the mud guard in
front of your foot.
Tiller (1 ) /
Handlebars (1
.7)
Your Breeze S is designed for both hand operation, But it is delivered
to you with right
-hand controls.
(Left-hands controls can be setup by your dealer).
Mirror (1.4)
Every Breeze S is supplied with 1 or 2 mirrors.
Operating Speed lever (1.8)
Use to control the Breeze S speed.
Brake Lever (1.16)
Use to brake in emergency conditions or when needed.
Charging Socket (1.12)
The socket is used to connect the charger plug for batteries charging.
Right hand side of the Handlebar.
Handlebars Adjusting Lever
(1.10)
The Handlebar of the Breeze S is adjustable Forward and Reverse by
releasing the Adjusting Lever.
Buzzer (1.18)
Use to alarm the people around when needed.
Front Basket (4.1)
For carrying parcels and personal effects. Maximum load 8 kg (17.6
lbs).
Headlight (4.2) and Front
Blinkers (4.3)
(a) Road light for dark hours
(b) Blink light for turnings signals
Front Bumper (4.4)
Battery Cover (2)
Protect the power unit, electronics and batteries.
Fuses (2.1a, 2.1b)
2.1a - Main fuses 70A – Semi Automatic
2.1
b - Charge fuse 15A –Semi Automatic
Located between the rear wheel and the battery cover.
Manual Release of
electromagnetic brake (2.2)
The lever is at the rear area of the Breeze S. Manual release lever
allow you to push or pull the
Breeze S manually.
Push / Pull the lever a
s shown in the label:
= Release (Push), = Engaged (Drive).
When the lever is in released position the
Breeze S can not be
operated
/ drive.
Note: Never release the lever when the Breeze S is on slope.
Rear Bumper (2.3)
Rear Pilot & Brake lights (2.4)
Rear Blinkers (2.5)
Seat (7)
The Breeze S seat is equipped with folding armrests (7.3) to allow
convenient access to the Seat. The Seat itself can be rotated to allow
easy access.
Seat Back Rest (7.1)
Seat Head Rest (7.2)
Arm Rest (7.3)
Use for comfort entrance, Folded.
Seat Forward / Reverse
Lever (7.4)
The Lever is used to change the seat position Forward and Reverse,
to fit the driver mostly.
Seat Rotation Lever (7.5)
The Lever is used to swivel the Seat 45 and 90 degrees in either
direction, to ease the driver's access to the Seat.
Seat Height adjust
The Seat Height can be adjusted Up / Down to fit the user height.
This adjustment can be made by a technician.
F
or adjusting the seat height , you need to remove the sea
t and the
batteries cover ,
then remove the scre
w that secure the seat pin and
to reassemble it at another hole as desired, than re-secure the screw.
Rear Box (6)
For carrying parcels and personal effects. Max. load 10 kg (22 lbs).
Floor (4)
Carpet covered. Possible to remove for cleaning.