Operation Manual

22
CHAPTER 4 – ADJUSTMENTS INSTRUCTIONS
(Reference numbers refer to the figures #4 and #5
)
Adjusting the
Tiller angle
(1
.7)
Adjust the Angle of tiller as follows:
· Release the Handlebars Adju
sting Lever (1.10),
by pushing the lever down.
· Release the lever at the desired place.
Adjusting of the
Tiller Height
Tiller height can be adjusted by technician about 40mm.
Seating into the
Breeze S
Before driving the Breeze S make sure that the
Charging Plug is disconnect
ed from the Charging
Socket (1.12
).
Note:
While the Charging Plug is inserted in the
Charging Socket, the
Breeze S
cannot be operated.
Use the Lever (7.5
) to rotate the Seat to the side for
easy access. R
aise the Armrest (7.3
) to give you easy
access to the Seat.
Adjust the seat Forward Reverse using
the Lever(7.4
)
Handlebars and
Hand protectors
When driving always keep your hands on the
handlebars (1.7) and within the hand protectors (1.6).
Adjust the shock
absorbers to the
user.
I t is possible to adjust the rear shock absorber to the
required load or w
ay of using the Breeze.
If needed,
ask a technician to adjust the absorbers for your
needs..
Figure 4 Figure 5