Operation Manual

28
S is stopping softly and that you hear a click coming from
the EMB engaging.
5.
Make a check of all the buttons functions on the
handlebar.
6.
Switch off the main key switch. Your Breeze S is now
ready to drive.
Pre-use
measures
The user should know his weight and all other loads are
lower than the maximum of 160
Kg (352 lbs) / 200 Kg (44
0
lbs) depend on the model. If not sure it should be measured.
Safety Belt
Use a safety belt when ever it is needed or under local
ordinance.
Attaching the
Breeze S
in
motor vehicle for
transportation
To transport the Breeze S in a motor vehicle , the Breeze
has to be secured while traveling .
The Foot rest of the
Breeze S
should be tie down (6) to the
motor vehicle floor with a suitable restrain belts and tight
systems.
The Rear part of the
Breeze S
should be tie down (7) as at
the 2 Yellow Marks at the rear part of the
Breeze-
in the lower
part of the power unit .
The tie/restrain system should be with similar components
and securing ,like the ones used in standard cars fasten belt.
Warning : When transporting the
Breeze S
, never use it
for any one to be seated on the scooter.
Figure 8
Transportation
To reduce the height of the Breeze S while transporting it,
The seat can be removed as explai
ned in chapter 3:
maintenance.
And as well the Tiller can be folded to
horizontal position.