Operation Manual

CHAPTER 6 – CHARGING

Read Charger’s manual before using the charger.

Warning: If you use a different charger, ask your dealer for

instructions.

CHARGING BATTERIES (See figure10)

1. Insert first the Charging Plug (8) to the Charging Socket (9) located at the

right side of the tiller box.

2. Plug the power cord (10) of the ch

arger into a wall outlet (11).

3. When charging is completed and you are ready to go

unplug the charger

cord (10) from the wall outlet (11) and then remove the charger plug (8) from

the

Breeze S charging socket (9).

4. In ideal storage conditions, batteries which were charged to full capacity

and a

re not used should be recharged every 6 months.

5. If you are planning not to use your

Breeze S

for an extended period of

time, we recommend charging it for two days and then disconnecting the

batteries.

6. If

you have not used your Breeze S

for an extended period of time,

charge the batteries for at least 24 hours before driving.

Note: There is NO need to disconnect the Charging Plug promptly

after the charging is complete.

· However, DO NOT leave the Charger c

onnected to the batteries

FOR MORE THAN TWO WEEKS.

· As long as the Charging Plug is in the Charger Socket, the

electronic control of the Breeze

automatically cuts all power to the

electric system and the Breeze Sannot be driven.

· The charger supplied is suitable for charging Lead Acid Dry/Gel

batteries .Only the defind type of charger should be used. U

sing

any other type of charger should be approved by your Dealer /

Supplier.

Figure 10