User's Manual

STEP 6 - POWER Afinia
At the back of the printer:
a) Plug in the supplied USB cable to both the
printer and your computer.
b) Plug in the supplied power supply
c) Switch on!
The front display will pulse with an orange light
to indicate the printer is ready to beinitialized.
STEP 7 - AFINIA SOFTWARE
Start the Afinia 3D software and click 3D
Print. If the Initialize option is available, go
ahead and click initialize.
If Initialize is unavailable, check that the Afinia
drivers are correctly installed.
During initialization the printer finds its home
position on each X,Y, and Z axis. Initialization
is required every time the printer is switched on.
STEP 8 - AUTOMATIC CALIBRATION
The most important part of 3D printing is
having a level platform and the correct distance
between the nozzle and the platform. Click
Auto Level,the head will check 9 points around
the platform are level, and then it will set the
platform/nozzle height.
You don't need to auto calibrate every time,
only if you are having issues.
CUATION: Double check you have
removed all the shipping cable ties and
packaging material from the inside of the
printer before you initialize the printer!
TIP: Ensure the end of the nozzle is clean and has no
bit sticking out, otherwise this will give your auto-
height a false reading.
Auto calibration can only be done when the
temperature of the nozzle is below 80c