60 cm 4 Zone ( 2 Induction and 2 Ceramic )Touch Control cooktop AC881 User Manual
CONTENTS WARNING DESCRIPTION OF THE COOKTOP AC881 OPERATING INSTRUCTIONS CABINET INSTALLATION ELECTRICAL CONNECTION COOKING AND USAGE TIPS CLEANING AND MAINTENANCE TROUBLESHOOTING
WARNING Please aware and pay attention to the following warnings in order to avoid electric shock hazard, short circuit, fire hazard and break down of the appliance. Installation and electrical connection of this cooktop must comply with SAA Wiring Rules and with local electrical and building regulations. • • • Do not temper, modify or repair the cooktop by yourself. Do not bend the cord sharply as it will damage the wire and might cause a short circuit.
DESCRIPTION OF THE COOKTOP AC881 Induction cooktops are easy and safe to use. Your model has 2 Induction and 2 Ceramic separate heating elements. Combination of 4 separate elements of the two most popular electric heating methods gives you a choice of power, size of the cooking zone and cookware type. Why 2 Induction Cooktops Are Different from 2 Ceramic Induction cooktops do not heat up like conventional electric elements.
Note: Your induction cooktop has an automatic cookware recognition sensor. If the cookware not compatible for induction cooking, too small or too light display window will show “E1” error code.
Set the timer by selecting the element and press “MENU” button. The screen will display ‘MIN” use + and – buttons until the timer display shows the required number of minutes. Maximum setting time is 99 minutes. While in operation, you will NOT notice any change in the cooking zone. Induction elements do not glow red. 5.To turn the element off, press the “ON/OFF” button CAUTION: Even though the elements themselves do not generate heat, the surface may become hot since it is in contact with a hot cookware.
INSTALLATION The installation and electrical power connection work must be undertaken by a qualified and licenced person in conformity with all current building and SAA electrical standards, as well as all local regulations in force. Safety Precautions • • Before starting the installation, consideration should be given to ensuring: Adequate space and clearances to nearby surfaces are provided. Availability of earthed power. • • The mechanical strength and heat resistance of supporting cabinetry.
• A minimum 50mm on sides (where 1 side wall ), min 100 x 50 mm(in a corner with 2 sides wall ) clearances of the cooktop must be provided to allow the air to flow freely Lay The Sealant and Install The Cooktop • • • Apply the sealant around perimeter of the top cutout edges, image 3. Lower the cooktop into the cutout, so an even seal will be formed, image 4. Use packing wood where necessary to secure the cooktop into the cabinetry.
• • • 8-9 Brings liquid to the boil quickly. When the liquid starts to boil, this setting is no longer needed. You can reduce the heat setting and still allow boiling to be maintained. 6-7 Browning meats, heating oil for frying, keep liquid on the boil 3-5 Steaming, or cooking covered foods once boiling temperature is reached 1-3 Melting chocolate or butter. Keeping foods warm. Saving Energy Induction cooktops are very energy efficient.
For Normal Cleaning • • • • When the cooktop is cool, wipe the glass with a clean damp cloth or nylon pad. You may also use a fresh solution of dishwashing detergent and warm water. Do not use a dirty sponge or use the same water used for washing up, as this may leave a greasy residue which will show up as streaks when the cooktop is next heated. Wipe away any residual cleaning agent with clean water. Do not use abrasive sponges or cleaners.
TROUBLESHOOTING This cooktop equipped with the safety sensors to detect and display on screen of following functional disorders.
