Owner manual

SAFETY

STOP MACHINE AND TURN OFF ENGINE TO ADJUST, LUBRICATE, OR SERVICE.

Ag-Bag International, Ltd.

MB7010 HyPac November 2003

Section 1

• The use of a flashing amber light is acceptable in most localities. However, some

localities prohibit their use. Local laws should be checked for all highway lighting and marking

requirements.

• When driving the tractor and equipment on the road or highway at night or during the

day, use flashing amber warning lights and a slow moving vehicle (SMV) identification em-

blem.

• Plan your route to avoid heavy traffic.

• Be a safe and courteous driver. Always yield to oncoming traffic in all situations, in-

cluding narrow bridges, intersections, etc.

• Be observant of bridge loading ratings. Do not cross bridges rated lower than the

gross weight at which you are operating.

• Watch for obstructions overhead and to the side while transporting.

• Always operate equipment in a position to provide maximum visibility at all times.

PERFORMING MAINTENANCE:

• Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.

• Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle

in a closed building. The exhaust fumes may cause asphyxiation.

• Before working on this machine, stop the towing vehicle, set the brakes, disengage

the PTO and all power drivers, shut off the engine and remove the ignition keys.

• Be certain all moving parts on the machine have come to a complete stop before

attempting to perform maintenance.

• Always use a safety support and block the wheels. Never use a jack to support the

machine.

• Always use the proper tools or equipment for the job at hand.

• Use extreme caution when making adjustments.

• Follow the torque chart in this manual when tightening bolts and nuts.