Owner manual

SAFETY

STOP MACHINE AND TURN OFF ENGINE TO ADJUST, LUBRICATE, OR SERVICE.

Ag-Bag International, Ltd.

MB7010 HyPac November 2003

Section 1

• Never use your hands to locate a hydraulic leak on attachments. Use a small piece of card-

board or wood. Hydraulic fluid escaping under pressure can penetrate the skin.

• When disconnecting hydraulic lines. Shut off hydraulic supply and relieve all hydraulic pres-

sure.

• Openings in the skin and minor cuts are susceptible to infection from hydraulic fluid. If injured

by escaping hydraulic fluid, see a doctor at once. Gangrene can result. Without immediate

medical treatment, serious infection and reactions can occur.

• Replace all shields and guards after servicing and before moving.

• After servicing, be sure all tools, parts and service equipment are removed.

• Do not allow grease or oil to build up on any step or platform.

• Never replace hex bolts with less than grade five bolts unless otherwise specified. Refer to bolt

torque chart for head identification marking.

• Where replacement parts are necessary for periodic maintenance and servicing, genuine fac-

tory replacement parts must be used to restore your equipment to original specifications. Ag-Bag

International will not claim responsibility for use of unapproved parts and/or accessories and other

damages as a result of their use.

• If equipment has been altered in any way from original design, Ag-Bag International, Ltd. does

not accept any liability for injury or warranty.

• A fire extinguisher and first aid kit should be kept readily accessible while performing mainte-

nance on this equipment.