Owner manual

SAFETY

STOP MACHINE AND TURN OFF ENGINE TO ADJUST, LUBRICATE, OR SERVICE.

Ag-Bag International, Ltd.

MB7010 HyPac November 2003

Section 1

SAFETY SIGN CARE:

Keep safety signs clean and legible at all times.

• Replace safety signs that are missing or have become illegible

• Replaced parts that displayed a safety sign should also display the current sign.

• Safety signs are available from your authorized Ag-Bag

Dealer or Ag-Bag Interna-

tional, Ltd.

HOW TO INSTALL SAFETY SIGNS:

• Be sure that the installation area is clean and dry.

• Decide on the exact position before you remove the backing paper.

• Remove the smallest portion of the split backing paper.

• Align the decal over the specified area and carefully press the small portion with the

exposed sticky backing in place.

• Slowly peel back the remaining paper and carefully smooth the remaining portion of

the decal in place.

• Small air pockets can be pierced with a pin and smoothed out using the piece of decal

backing paper.

TIRE SAFETY:

• Failure to follow proper procedures when mounting a tire on a wheel or rim can pro-

duce an explosion which may result in serious injury or death.

• Do not attempt to mount a tire unless you have the proper equipment and experience

to do the job.

• Inflating or servicing tires can be dangerous. Whenever possible, trained personnel

should be called to service and/or mount tires.

• Always order and install tires and wheels with appropriate capacity to meet or exceed

the anticipated weight to be placed on the equipment.