Operator`s manual

PFadvantage
Teejet 844
Ag Leader Technology
Application Rate Mode
September 2003
2-91
Setup for Teejet
844 controller
A separate configuration of settings should be created for every product
applied. A maximum of 16 different configurations can be created. The
screen below illustrates two configurations set up for the Flexcontrol
controller.
1. Press SETUP key. Press APP RATE CONFIG key. A screen
similar to the one below should appear:
APP RATE CONFIG
PRODUCT CONTROLLER CHANNEL
PRODUCT 1 TEEJET 844 CARRIER
PRODUCT 2 TEEJET 844 CARRIER
EDIT
SETTINGS
CREATE
NEW
DELETE EXIT
Press CREATE NEW key to set up a new configuration or select an
existing configuration and press the EDIT SETTINGS key. A new screen
appears with the following settings. Select each setting and press EDIT
key to change the settings.
Controller Make: Set to SPRAY SYS.
Controller Model: Set to TEEJET 844.
Product: Press EDIT key. You can select an existing product and
press ACCEPT key or create a new product by pressing CREATE
NEW key. Press EDIT NAME key and enter name of product.
Use Left or Right Arrow keys to select a character. Use Up or
Down Arrow key to change the character. To erase a character in
the name, highlight that character and use UP or DOWN ARROW
key to scroll to the blank space between "9" and "A". Set every
character and press ACCEPT key twice.
Units: Set to Units/Acre of application. Set to POUNDS if
applying fertilizer. Set to GALLONS if applying liquid.