Operator`s manual

PFadvantage
Updating Operating Program
Ag Leader Technology
All Modes
September 2003
4-53
Updating from a
Step Action
Memory Card
1 Using a computer and card reader, copy the file “upgrade.pld”
from the floppy disk to the memory card. Delete all other files off
the memory card.
2 Insert the memory card in the monitor and turn on the monitor.
3 The monitor will detect a new operating program on the card.
Press the SHOW FILES key. The monitor will display the version
number of the current program and new program. Press ACCEPT
key to install the new version.
4 The monitor will erase the old program and install the new
program.
5 Check some of the field/load information and settings to confirm
that the new program is operating correctly.
Using PF Utilities
Program
If you do not have a memory card and card reader available you can install
the PF Utilities program on your computer. This utility program enables
your computer to transfer the upgrade (*.pld) file to the PFadvantage using
the PC interface cable.
NOTE:
The PF Utilities program is available from Ag Leader Technology on the
Software Suite CD or by calling (515)-232-5363 ext 1.