Operator`s manual

Troubleshooting
PFadvantage
Harvest Mode
Ag Leader Technology
September 2003
6-8
Problem Cause Solution
Bu/Ac or lbs/Ac Yield
too high or low (cont.)
“Expand Grain
Below Dry” is set to
YES.
To view this setting, press MENU, SETUP and
VEHICLE keys. If this setting is YES, any grain
harvested below the dry moisture value will be
increased to the dry moisture value before the
yield is calculated. If the average moisture of the
grain is below the Dry Moisture value, the yield in
bu/ac will be higher than that calculated from the
elevator. This occurs in soybeans where the
moisture is often below the Dry Moisture value.
To accurately compare the yield of different
soybean varieties, increase the bushels to the Dry
Moisture value. Use the up/down arrow keys to
select “Expand Grain Below Dry” and press EDIT
key. Use the up down arrow keys to select NO
and press ACCEPT key.