User Manual

Part No. 2002831-39 Rev. D
10
Section 7: Key Settings/Functionality
Spinner Spreader Application Rate Control Tab
The Application tab for spinner spreader
control has several buttons and status
display areas that are specific to granular
product control. This table outlines the
details of these controls.
Press to display the Spreader Control
window and settings. These settings
include:
 Spread Width
 Spinner Speed (if enabled)
 Product Density
 Feed Gate Opening
 Conveyor Rate
For more information, see Section 6 “Run
Screen Functionality Menu”.
Displays active spread pattern width.
The Auto Swath check box allows the
enable/disable of the Automatic Swath
Control functionality. (Requires an unlock
purchase).
Displays the status of the product control
channel. When the fertilizer bin is grey as
shown at the left, no product application is
taking place. When product is being
applied, the fertilizer bin icon will turn
green.
Displays the current target application rate.
Press the up arrow button to go to the
Target Rate Application window.
The Master Switch Indicator shows if the
master switch is on (green) or off (red).
The master switch is shown in the F1
position on the Auxiliary Input Settings
window.