User Manual
PN ?????? Rev A
PN 2006313 Rev A
1
1
DirectCommand
TM
Strip Till / Air Cart
Quick Reference Guide
AL: 2006315 - ENG Rev B
Valve Response 1
fast speed of valve, decrease to slow response time
default = 40%
Valve Response 2
slow speed of valve, decrease to slow response time
default = 8%
Response Threshold
point where system switches between using
Response 1 and Response 2, increase to slow
response time, default = 15
Allowable Error
error allowed before making rate control adjustments
Shaft Speed Calibration
pulses/revolution of metering shaft
Max Metering Speed
maximum allowable RPM of metering system
Servo Valve
There is a tab for every channel of control with Control Valve Congurations and related settings.
Create Conguration
Enter Settings
Start of Conguration Wizard
Press to Highlight Conguration
4930rx
Application
Conguration Product
Application
Controller
Settings
Channel 1 Channel 2 Channel 3
Auxiliary
Control Valve Conguration
Channel 2 Channel 3 Auxiliary
Channel 1
Servo
Valve
Response 1
Valve
Response 2
Response
Threshold
Strip Till Control
Allowable
Error
Max Metering
Speed
Shaft Speed
Calibration
180 pls/rev
100 rpm
2 %
8 %
40 %
15