TABLE OF CONTENTS Important Safety Instructions ..................................................................1 1.1 Safety precautions and maintenance…………………….…............1 1.2 Use…………………………………………………………..…..……...4 1.3 Installation Notes……………………………………………..…..…...7 Package Content .......................................................................................9 2.1 Unpacking………………………………………………….…………..9 2.2 Accessories……………………………….…………….………..…..10 2.3 Overview……………………………………………………..……….
Important Safety Instructions 1.1 Safety precautions and maintenance WARNING: Use of control, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources.
Important Safety Instructions Maintenance: • To protect your display from possible damage, do not put excessive pressure on the display. • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display.
Important Safety Instructions Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. • Keep the display out of direct sunlight and away from stoves or any other heat sources.
Important Safety Instructions 1.2 Use • Don’t turn the ventilation hole of Power Box upside down. As shown in the picture below. The ventilation hole of power box The ventilation hole of power box It is prohibited to turn the ventilation hole of Power Box upside down.
Important Safety Instructions • When you install the display, please don’t use the “bottom side” I/O hole and open the I/O cover . As shown in the picture below. The “bottom side” I/O cover can’t be opened.
Important Safety Instructions Remote Controller Precautions: • This product requires remote switch (ON/OFF) from Front Side ; the Back Side only has OSD function operated by remote controller. Back Side (450 nits) Front Side (450 nits) The Front Side have a product label. Disconnect devices: • For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
Important Safety Instructions 1.
Important Safety Instructions Please make sure you have a solid installation. As shown in the picture.
Package Content 2.1 Unpacking • • • This product is packed in a carton, together with the standard accessories. Due to the size and weight of this display it is recommended for two people to move it. After opening the carton, ensure that the contents are complete and in good condition.
Package Content 2.
Package Content 2.
Package Content 2 4 1 3 1. 2. 3. 4. 5.
Setting Up The Display 3.1 Step 1 : Putting the dual-sided display upside While the display put upside , the screw will be seen on the left.
Setting Up The Display 3.
Setting Up The Display 3.3 Step 3 : Remove the downside cover Tear down the downside cover.
Setting Up The Display 3.
Setting Up The Display 1 Connect the 12V (8 pin) power line 2 Connect the 24V (10 pin) power line 1 2 12V*1 Yellow line (8 pin) 24V*1 Red line (10 pin) 17
Setting Up The Display 3.5 Step 5 : Connect by HDMI connector Plug two HDMI cables into the cabinet. And ensure that all cable plugs are firmly fitted to the equipment jacks.
Setting Up The Display 3.6 Step 6 : Reinstall the downside cover and I/O covers 1 Reinstall the downside cover. screws x 10 (M6x30mm) 2 Reinstall the other two I/O covers which are not used.
Setting Up The Display 3.7 Step 7 : Connect the power cord Power Box AC in / switch Plug in the power cable and turn on the AC power switch.
Setting Up The Display 3.8 Step 8 : Using the Remote Control 1 3 4 5 2 No.
Setting Up The Display 3.
Setting Up The Display Press “MENU” into the OSD Setting Menu, and then press “UP” or “DOWN” to select the item, at last press “EXIT” to leave menu : Color Press MENU to select one of the following, and then press “UP” or “DOWN” to select the desired level, ---Color Temperature: Range: 6500K, 9300K, 11500K, User Define Default: : 9300K If you choose the User Define, you can adjusts red, green, blue gain and red, green blue offset; ---Red: 0~100 ; Default : 70 ---Green: 0~100 ; Default : 70 ---Blue: 0~100
Setting Up The Display Press “MENU” into the OSD Setting Menu, and then press “UP” or “DOWN” to select the item, at last press “EXIT” to leave menu : OSD Settings Press MENU to select one of the following, and then press “UP” or “DOWN” to select the desired level, ---Horizontal: 0~100 ; Default : 50 ---Vertical: 0~100 ; Default : 50 ---Transparency: 0~4 ; Default : 0 ---OSD Time Out: 0~60 ; Default : 5 ---OSD Rotation: 0(0 ˚),1(90 ˚),2(270 ˚),3(360 ˚) ; Default : 0(0 ˚) 24
Setting Up The Display Press “MENU” into the OSD Setting Menu, and then press “UP” or “DOWN” to select the item, at last press “EXIT” to leave menu : Setup Press MENU to select one of the following, and then press “UP” or “DOWN” to select the item , ---Language: English / Español / Français / Deutsch / Italiano / Português / Русский /简体中文 / 日本語 / 繁體中文 ; Default :English ---Input: HDMI1 / HDMI2 ; Default :HDMI2 ---Display Size: Full Screen / Smart Fit / 4:3 / Smart4:3 ; Default : Full Screen ---Reset: No /
Trouble shooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 2. The main power switch on the back of the display is not switched on. 3. The selected input has no connection. 4. The display is in standby mode. 1. Plug in the power cord. 2. Make sure the power switch is switched on. 3. Connect a signal connection to the display.
Specifications LCD Display 55” Input Connectivity SET Power Packing Environmental Conditions Model name DS-55 Screen size 55 inch (diagonal) Resolution 1920 x1080 (Pixel) Display Area 1209.6(H) x 680.4(V) Contrast Ratio 3000:1 Brightness 450 nits / 450 nits View angle 178° (H); 178° (V) Color Gamut 72 (%) Surface Treatment Haze 11%,3H HDMI*2 Dimension 1515.9 x 856.8 x x 23.4 mm Weight 45.
Product Dimensions A,B,C: I/O covers 28 Company Address: 5F-1, No. 3-1, Park Street, Nangang District, Taipei, 11503, Taiwan.