TABLE OF CONTENTS FCC information ---------------------------------------------------------------------- 3 CE information ------------------------------------------------------------------------ 3 Safety Precautions ------------------------------------------------------------------- 3 1. Scope -------------------------------------------------------------------------------------- 5 2. Functional specification ------------------------------------------------------------- 5 3.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
8. Route power cords so that they cannot be walked upon or tripped over. Do not allow anything to rest on the power cord. 9. Do not install monitor in wet areas, or where it may be exposed to rain or water. Do not spill liquid of any kind on the unit. 10. Unplug the power cord from the unit before cleaning the display. Use only a damp cloth. Do not use alcohol, spirits, or ammonia to clean the display.
1. Scope This specification is used to define the performance of SC-17P, 19P & SC-22 series color TFT LCD monitor. This system also supports both video input and PC input. In video input mode, the system can automatically detect the NTSC signal and PAL signal. In PC mode, this system can support up to 1920 x 1080 VESA standard. The user friendly OSD menu is also provided to make this system easy to operate. 2 Functional Specifications 2.
2.5 Environmental Temperature Operating: 00C to +400C Storage: -200C to +600C Humidity Operating: 10% to 85% (non-condensing) Storage: 10% to 95% (non-condensing) 2.6 EDID This series of displays support EDID, but does not support DDC2B function. 2.7 Connectors H G F E D C B A A. AC INPUT: AC SOCKET B. AUDIO OUTPUT: Phone Jack, Stereo C. AUDIO INPUT: Phone Jack, Stereo D. CVBS OUTPUT: BNC Connector E. CVBS INPUT: BNC Connector F. S-VIDEO (Y/C) INPUT: Mini-DIN 4 pins Connector G.
3. Controls and indicators SC-17P/SC-19P MONITOR A. “ ”Source button Press the button to show source menu. Select DHMI, S-Video, VGA and VIDEO input signal B. “ ”Down buttons Press the buttons to scrolling the cursor to desired function. Press the buttons to decrease the value of selected function in sub OSD menu. C. “ ”Up button Press the buttons to scrolling the cursor to desired function. Press the buttons to increase the value of selected function in sub OSD menu.
D. “ ”Menu button Press the button to show the OSD main menu. As a confirmation key during the OSD operation. E. “ ” Power button Press the button to turn ON or turn OFF the monitor F. POWER LED Indication Green - Power on LED light off - Power off Flash Green - Sleep mode (PC mode only) SC-22 MONITOR A. “ ” Source button Press the button to show source menu. Select DHMI, S-Video,VGA and VIDEO input signal B. “ ” UP buttons Press the buttons to scrolling the cursor to desired function.
C. “ ”Down button Press the buttons to scrolling the cursor to desired function. D. “ ”Volume+ buttons Press the buttons to increase volume Press the buttons to increase the value of selected function in sub OSD menu. E. “ ”Volume- button Press the buttons to decrease volume Press the buttons to decrease the value of selected function in sub OSD menu. F. “ ”Menu button Press the button to show the OSD main menu. As a confirmation key during the OSD operation. G.
4. OSD Menu Hot key: Quick adjust keys from front panel hot keys: : VOLUME: SC-17P & SC-19P: / Press or button to select the function and press buttons to adjust the volume , then press SC-22: Press or button to select the function and press adjust the volume, then press KEY LOCK:Push to exit OSD menu. / to exit OSD menu. for 6 sec to enable this function. KEY UN-LOCK:Push for 6 sec to disable this function.
VGA & HDMI mode: OSD Menu structure: : Use to select the VGA, HDMI, CVBS, or S-VIDEO, the menu structure within each varies, refer to sections below on how to set-up each option. VGA / HDMI mode: : Press to bring up the MAIN MENU Page. The following page will appear Press / to select an icon, then Press VGA MAIN MENU HDMI MAIN MENU 11 to change the values in the sub menu.
MAIN ADJUST: : 1. Press / 2. Press to select an icon. to select item, / 3. SC-17P & SC-19P: Press SC-22: Press 4.
COLOR ADJUST: : Set the color temperature of the LCD monitor for the CIE coordinate 9300˚k or 6500˚k or USER MODE 1. Press / 2. Press to select an icon to select adjust item, 3. SC-17P & SC-19P: Press SC-22: Press 4. Press / / to adjust the value to adjust the value to return USER COLOR:Adjust the color temperature. RED:Adjust the RED value for user mode. GREEN:Adjust the GREEN value for user mode. BLUE:Adjust the BLUE value for user mode.
IMAGE ADJUST (VGA ONLY): : 1. Press / 2. Press to select an icon to select adjust item / 3. SC-17P & SC-19P: Press SC-22: Press 4. Press / to adjust the value to adjust the value to return AUTO ADJUST:Press to auto adjust the H. Position, V. Position, Phase, Clock H. POSITION:Adjust the horizontal position value V.
INFORMATION: : Press to get the VGA timing information LANGUAGE: :Press 1. Press 2.
SETUP MENU: : 1. Press 2. Press / to select an icon to select adjust item 3. SC-17P & SC-19P: Press SC-22: Press 4. Press / / to adjust the value to adjust the value to return OSD TIMEOUT:Adjust the OSD Show time (5 ~120 sec) GREEN MODE:Off or On (5 min~10 min) OFF – No function ON – Screen will reduce back light to 80% within (5 min to 10 min) Screen will back to normal when any button is being touched.
AUTO SHIFT:Adjust AUTO SHIFT ON/OFF OFF – No Function ON – Every one hour there will one scan line from top to bottom ( Every 1 second down one scan line) to prevent panel sticking. Anti-Burn-inTM scan line EXIT:Press to return to the main menu RECALL: : Brightness, Contrast, Volume, Vivid Mode, OSD Timeout, Green Mode, Auto Shift return to default Value.
Video mode: Press Press to bring up the MAIN MENU Page. The following page will appear / to select an icon, then Press to change the values in the sub menu. MAIN ADJUST: : 1. Press 2. Press / to select an icon to select item 3. SC-17P & SC-19P: Press SC-22: Press 4.
VIVID MODE:Select the VIVID MODE (0~3 and USER) USER, 0: TEXT, 1: PHOTO, 2: MOVIE, 3: GAME BRIGHTNESS:Adjust the brightness value. CONTRAST:Adjust the contrast value. SHARPNESS:Adjust Image sharp. SATURATION:Adjust Image saturation. TINT:Adjust Image tint. (NTSC only). VOLUME:Adjust the volume . EXIT:Press to return to the main menu.
COLOR ADJUST: : Set the color temperature of the LCD monitor for the CIE coordinate 9300˚k or 6500˚k or USER MODE 1. Press / 2. Press to select an icon to select adjust item, 3. SC-17P & SC-19P: Press SC-22: Press 4. Press / / to adjust the value to adjust the value to return USER COLOR:Adjust the color temperature. RED:Adjust the RED value for user mode. GREEN:Adjust the GREEN value for user mode. BLUE:Adjust the BLUE value for user mode.
SCAN SETTING: : 1. Press to select the sub-menu 2. SC-17P & SC-19P: Press / SC-22: Press 3. Press / to select Scan Setting state. to select Scan Setting state. to return INFORMATION: : Press to get the timing information LANGUAGE: :Press 1. Press 2.
SETUP MENU: : 1. Press 2. Press / to select an icon to select adjust item 3. SC-17P & SC-19P: Press SC-22: Press 4. Press / / to adjust the value to adjust the value to return OSD TIMEOUT:Adjust the OSD Show time (5 ~120 sec) GREEN MODE:Off or On (5 min~10 min) OFF – No function ON – Screen will reduce back light to within (5 min to 10 min) Screen will back to normal when any button is being touched.
EXIT:Press to return to the main menu. RECALL: : Brightness, Contrast, Sharpness, Saturation, Tint, Volume, Vivid Mode, OSD Timeout, Green Mode, Auto Shift return to default Value.
5. Regulatory Agency 5.1 Safety Approvals This series design shall meet the standards of the following domestic and foreign agencies: CE LVD : EN60950 5.2 EMI/EMS Emission Approvals This series design shall meet following EMI/EMS specifications: FCC Compliance: FCC Rules and Regulations, Part 15, subpart B, Class B.
6. Mechanical 6.1 Cabinet Material: Plastic Finish: Black 6.
6.3 Packaging Dimensions WxHxD mm SC-17P: 450x467x138mm SC-19P: 464x585x121mm SC-22: 565x420x114mm Company Address: 5F-1, No. 3-1, Park Street, Nangang District, Taipei, 11503, Taiwan.