Operation Manual

1. Read these instructions thoroughly and keep this user manual for future use.
2. Do not use the product near water. Never spill liquid of any kind of the products. Clean LED
monitor when power off. Never clean it with liquid cleanness or liquefier. Better use clean wet
cloth carefully.
3. Do not place the product on an unstable cart, stand or table. Doing so may cause the product
to fall, which can seriously damage it.
4. To ensure reliable operation, never block these ventilation slots by placing the product on a
bed, rug or similar surface; this product should never be placed near or over a radiator or
heat register; or installed in any enclosure that prevents proper ventilation.
5. Do not place any object on the adapter. Do not place this product where persons could walk
on the adapter.
6. Never push objects of any kind through the ventilation slots at the back of the product. To do
so could risk fire or electronic shock.
7. Do not attempt to service this product by yourself. Opening or removing covers
may expose
you to dangerous voltage that could cause fire or electronic shock. Refer all servicing needs
to authorized service personnel.
8. Unplug this product from the wall outlet and contact authorized service personnel under the
following conditions:
9. The socket-outlet shall be installed near the equipment and shall be easily accessible.
a. When the adapter or plug is damaged or frayed.
b. If a liquid has been spilled into or on the product.
c. If the product has been rained or spilled by water.
d. If the product has been dropped or the cabinet has been damaged.
e. If the product does not operate normally when operating
instructions are followed, and
product shows to be maintained.
Only under normal condition can the quality of LED products be assured during operation.
Normal condition as following:
Temperature: 20±15
Moisture: 65±20
Display image: continuously changing image. (Not freezing image)
For the LED products, the phenomenon of image stagnation may appear when display the
freezing image for a certain long time. All the display products including LED may have this
kind of image stagnation, and this is not a kind of defe
ct In order to avoid the phenomenon of
image stagnation, we suggest that the screen protection program be set when your PC or
system is spare.
Special Notice
Important Safety Instruction
2