Operation Manual

1. Turn off computer and unplug power cord.

2. To connect signal cable with 15pin into VGA connector on the back of monitor, and to be

sure to tighten switches on both ends of signal cable.

3. To plug PC and monitor adapter to the nearest socket.

4. Turn on PC and monitor, image possibility shows successful installation. If not , please

double check all the connections.

NOTES:

1. To connect signal cable and plug adapter to be assure monitor safety on process of

installation.

2. To avoid monitor damaged, please handle the centre part of front cover while it installation.

MONITOR INPUT CONNECTIONS:

1. AC power input

2. AUDIO input

3. HDMI signal input

4. VGA signal input

Connection

Stand Assembly Instruction

❶ ❷ ❸

❹