LE-22, LE-24 & LE-27 LED-Backlit Display User Manual
TABLE OF CONTENTS SAFETY PRECAUTIONS. ................................................................................. 3 FOR YOUR SAFETY .................................................................................... 3 SPECIAL NOTES ON LCD MONITOR ...................................................... 5 BEFORE YOU OPERATE THE MONITOR .................................................... 6 FEATURES ....................................................................................................
FOR YOUR SAFETY Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. SAFETY PRECAUTIONS FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) This device complies with Part 15 of the FCC rules.
FOR YOUR SAFETY PRECAUTIONS • Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. • Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor.
FOR YOUR SAFETY WEEE DECLARATION Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
BEFORE YOU OPERATE THE MONITOR FEATURES • 54.69cm (21.5 inches) TFT Color LCD Monitor 59.94cm (23.6 inches) TFT Color LCD Monitor 68.6cm (27inches) TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions: 1920x1080@60Hz • Ergonomic Design • Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items: 1. LCD Monitor 2. Owner’s Manual (including CD-ROM & Warranty Card) 3. Power Cord 4. D-Sub Cable 5. Audio Cable 6.
BEFORE YOU OPERATE THE MONITOR ADJUSTING THE VIEWING ANGLE For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so that the monitor does not topple when you change the monitor’s angle.
BEFORE YOU OPERATE THE MONITOR Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. Connect the AC-power cord into your LCD monitor’s AC-power-input.
BEFORE YOU OPERATE THE MONITOR Figure 3 Connecting Cables 9
BEFORE YOU OPERATE THE MONITOR GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the video card. • Press the power button to turn on the monitor position. The power indicator will light up.
OPERATING INSTRUCTIONS FRONT PANEL CONTROL • Auto/ Source / Exit: 1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu). 2. When OSD menu is in off status, press this button to select input Source: D-Sub/DVI/HDMI. 3. When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function. The Auto Adjustment function is used to set the HPos, VPos, Clock and Phase.
OPERATING INSTRUCTIONS HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press + or - to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press + or - again to navigate through the submenu functions. Once the desired function is highlighted, press MENU-button to activate it. 3. Press + or - to change the settings of the selected function. 4.
OPERATING INSTRUCTIONS ADJUSTING THE PICTURE The descriptions for function control. Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Contrast Contrast from Digital-register Brightness Luminance Eco DCR Backlight Adjustment Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Sports Sports Mode Off Disable dynamic contrast ratio. On Enable dynamic contrast ratio. Adjust Picture Clock to reduce Vertical-Line noise.
OPERATING INSTRUCTIONS Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Full Enhance on or off Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode Green Field on or off Disable or Enable Green Field Mode Sky-blue on or off Disable Mode AutoDetect on or off Disable or Enable AutoDetect Mode Color Boost Demo or Enable Sky-blue on or off Disable or Enable Demo Frame Size Adjust Frame Size Brightness Adjust Frame Brightness Contrast Pictur
OPERATING INSTRUCTIONS Main Menu Item OSD Setup Main Menu Icon Sub Menu Item Sub Menu Description H.Position Adjust the horizontal position of OSD V.
OPERATING INSTRUCTIONS PLUG AND PLAY Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on. • Check if the Power Switch is in the ON position. • Power Cord should be connected. No Plug & Play • Check if the PC system is Plug & Play compatible. • Check if the Video Card is Plug & Play compatible. • Check if the D-15 plug pin of Video Cable is bent. Picture is fuzzy. • Adjust the Contrast and Brightness Controls.
TECHNICAL SUPPORT (FAQ) ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : 1. Check that the signal-cable is properly connected. If the connector is loose, tighten the connector’s screws. 2. Check the signal cable connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.
APPENDIX SPECIFICATIONS Specifications LE-22 Panel Size Pixel Pitch (mm) 21.5" 23.6" 27" 0.24825 x 0.24825 0.2715 x 0.2715 0.3114 x 0.3114 Max. Resolution 1920 x 1080 Display Colour 16.7M Frequency H. Freq. 30KHz – 83KHz (H/V) V. Freq. 56Hz – 76Hz VGA 15-Pin D-Sub DVI 24-Pin DVI Input LE-27 LED-backlit TFT LCD Panel Type LCD Panel LE-24 HDMI HDMI Audio in 1 x stereo audio in for PC (audio jack, 3.5 Ø ) Speaker 2W x 2 Audio Power Power Supply 100-240V~, 50/60Hz, 1.
APPENDIX Specifications LE-22 Switch • +/Volume+ • -/ECO • AUTO/SOURCE/EXIT • MENU/ENTER • POWER BUTTON Functions • Luminance • Image Setup • Color Temp. • Color Boost • Picture Boost • OSD Setup • Extra Control Setting Plug & Play Temperature Conditions Humidity Storage Temperature Conditions Humidity Dimension LE-27 VESA DDC2B Operating Weight LE-24 0°C ~ 40°C (32°F ~ 104°F) 10% ~ 85% -20°C ~ 60°C (-4°F ~ 140°F) 5% ~ 90% Weight (with base) 4.94 kg 5.60 kg 8.
APPENDIX FACTORY PRESET TIMING TABLE Preset Display Modes Standard VGA Dos-mode SVGA Mac-Mode XGA SXGA WSXGA WSXGA+ FULL HD Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) 640×480 @60Hz 31.469 59.940 640×480 @67Hz 35.000 66.667 640×480 @72Hz 37.861 72.809 640×480 @75Hz 37.500 75.000 720×400 @70Hz 31.469 70.087 800×600 @56Hz 35.156 56.250 800×600 @60Hz 37.879 60.317 800×600 @72Hz 48.077 72.188 800×600 @75Hz 46.875 75.000 832×624 @75Hz 49.725 74.
APPENDIX Video（HDMI ） Timing Table Format Resolution 480P@60Hz for Digital only 640 x 480 480P@60Hz for Digital only 720 x 480 576P@60Hz for Digital only 720 x 576 720P@50Hz for Digital only 1280 x720 720P@60Hz for Digital only 1280 x720 1080P@50Hz for Digital 1920 x 1080 1080P@60Hz for Digital 1920 x 1080 22
APPENDIX CONNECTOR PIN ASSIGNMENT 1 5 6 10 11 15 Figure 6 15-Pin Color Display Signal Cable Pin No. Description Pin No. Description 1 Red 9 +5V/Sense(+5V) 2 Green 10 Monitor Gnd 3 Blue 11 Logic Gnd 4 Logic Gnd 12 DDC serial data 5 Detect cable 13 H sync 6 Red Gnd 14 V sync 7 8 Green Gnd Blue Gnd 15 DDC serial Clk.
APPENDIX Figure 8 HDMI Signal Cable Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 11 TMDS Clock Shield 2 TMDS Data 2 Shield 12 TMDS Clock 3 TMDS Data 2 13 CEC 4 TMDS Data 1+ 14 Reserved (N.C. on device) 5 TMDS Data 1 Shield 15 SCL 6 TMDS Data 1 16 SDA 7 TMDS Data 0+ 17 DDC/CEC Ground 8 TMDS Data 0 Shield 18 +5V Power 9 TMDS Data 0 19 Hot Plug Detect 10 TMDS Clock + Pin No. Signal Name Pin No.
APPENDIX PRODUCT DIMENSIONS LE-22 ► Front View ► Side View ► Top View 25
APPENDIX PRODUCT DIMENSIONS LE-24 ► Front View ► Side View ► Top View 25
APPENDIX PRODUCT DIMENSIONS LE-27 ► Front View ► Side View ► Top View Company Address: 5F-1, No. 3-1, Park Street, Nangang District, Taipei, 11503, Taiwan.
